Sharp PN-455 INPUT1 (PC DIGITAL)

Connecting Peripheral Equipment

The various terminals on the LCD panel are described below.

INPUT1 (PC DIGITAL)

•Connect with the digital RGB output terminal on your computer using a digital signal cable (commer- cially available).

*Connection with computers that have an output terminal (DVI-D 24 pin or DVI-I 29 pin) conforming to DVI is possible. (However, images may not display properly depending on the computer.)

•Connect with an audio output jack on your computer using a PC audio cable (commercially avail- able).

▼Rear view

ENGLISH

Output terminals on
connected equipment		PC digital	PC audio input
Audio	Digital RGB	RGB input terminal terminal
Audio	Digital RGB
		INPUT1	PC AUDIO
		(DVI)	IN

Digital signal cable

PC audio cable

* See page 56 for compatible signals.

13 E

Contents

IMPORTANT INFORMATION WARNING: CAUTION IMPORTANT INFORMATION (Continued) DEAR SHARP CUSTOMER SAFETY PRECAUTIONS SAFETY PRECAUTIONS (Continued) TIPS AND SAFETY PRECAUTIONS Introduction Connection and Installation Basic Operation PC Operation Troubleshooting and Specifications ●HIGH-DEFINITION(HD) LCD PANEL ●ASV*LOW-REFLECTIONBLACK TFT LCD PANEL ●EQUIPPED WITH A VARIETY OF TERMINALS ●ENLARGEMENT FUNCTION ●CHAIN CONNECTION OF MULTIPLE MONITORS Page Front view Rear view Remote control unit Removing the battery cover Remote control operation range INPUT1 (PC DIGITAL) INPUT2 (PC ANALOG) INPUT3 (COMPONENT) INPUT4 (S-VIDEO/VIDEO) PC ANALOG RGB OUTPUT TERMINAL AUDIO OUTPUT TERMINAL Connecting the speaker cables Make sure to connect the speaker jack and cable polarity (, ) properly Connecting the AC cord Connection example Connection example for RS-232C Fastening the AC cord Page Main power switch Turning power on/off using remote control INPUT (Input selection) MUTE MENU VOL (Volume adjustment) BRIGHT (Backlight adjustment) Menu option selection 2. Press MENU to display the GAIN CONTROL menu 3. Press to select CONTRAST 4. Press (or ) to adjust the setting 5. Press MENU more than once to close the menu screen Menu screen explanation Initialization (Reset)/Functional Restriction Setting 1. After pressing for about 5 seconds, press , and 2. Select and set the items you want [ALL RESET] ■ADJUSTMENT (INPUT2) [MANUAL / AUTO] [MANUAL (CLOCK)] [MANUAL (PHASE)] [MANUAL (H-POS)] ■GAIN CONTROL (INPUT2) [MANUAL (BLACK LEVEL)] [MANUAL (CONTRAST)] ■WHITE BALANCE [THRU / COOL / • / STD / • / WARM / USER] (INPUT1 / INPUT2) [CONTRAST] (INPUT3 / INPUT4) [BLACK LEVEL] (INPUT3 / INPUT4) [TINT] (INPUT3 / INPUT4) [COLORS] (INPUT3 / INPUT4) [SHARPNESS] (INPUT3 / INPUT4) ■MODE SELECT [480 LINES] (INPUT2) [768 LINES] (INPUT2) [ENLARGE] (INPUT1/INPUT2) [ENLARGE POS] (INPUT1 / INPUT2) [OFF TIMER] [LANGUAGE] [ID NO SET] ■Switching the screen size (INPUT1 / INPUT2) ZOOM ■Switching the screen size (INPUT3 / INPUT4) Screen display for adjustments (INPUT2) Set-upinformation (INPUT1 / INPUT2) PC connection Communication conditions Communication procedure Basic operation Advanced operation <Commands for ID control Note Example: <Repeater control <Repeater control command <Response format in Advanced operation ■Normal response When control via page 34) ■If a timeout occurs while waiting for a command <Communication interval RS-232Ccommand table Power control/Input selection, etc Picture Adjustment (INPUT1) Picture Adjustment (INPUT2) Picture Adjustment (INPUT3/INPUT4) Special Control Problem Check item Warning when temperature rises Cracking sound ■Product Specifications ■Power management ■DDC (plug and play) ■Screen resolution chart Screen resolution Hsync Vsync Dot frequency ■ PC digital RGB input terminal pins ■ PC analog RGB input terminal pins input terminal pins output terminal pins PC analog RGB output terminal pins Page ■ INPUT1 ■ INPUT2 ■ INPUT3/4