Sharp PN-455 Example:, Example:, Example:

IDSL.......The parameter of this command sets the ID number indicating the monitor subject to the

next command.

Example:
IDSL0002	← The next command is for the monitor with ID number=2.
WAIT	← Searching for monitor with ID number=2
OK_002	← Found monitor with ID number=2
VOLM0030	← Sets volume of monitor with ID number=2 to 30.
WAIT	← Processing
OK_002	← OK response from monitor with ID number=2	The IDSL command is
VOLM0020	← Sets volume to 20.
OK_001	← The volume of the monitor with ID number=1	effective only once, for the
		immediately succeeding
	(the one directly connected to the PC) is set to 20.
		command.

IDLK.......The parameter of this command sets the ID number indicating the monitor subject to all

subsequent commands.

Example:
IDLK0002	← Following commands are for the monitor whose ID number is “2”.
WAIT	← Searching for monitor with ID number=2
OK_002	← Found monitor with ID number=2
VOLM0030	← Sets volume of monitor with ID number=2 to 30.
WAIT	← Processing	The IDLK command remains
OK_002
		effective until it is canceled, or
VOLM0020	← Sets volume of monitor with ID number=2 to 20.
		power is shut off.
WAIT
OK_002
IDLK0000	← Canceling ID number setting
WAIT	← Canceling IDLK
OK_002	← Cancelation complete
VOLM0010
OK_001	← The volume of the monitor with ID number=1
	(the one directly connected to the PC) is set to 10.

IDCK ......Provides screen display of the ID number currently assigned to a monitor, and the ID num-

ber currently set for IDLK (if any).

Example:

(After executing IDLK0002)

IDCK0000		← (Parameter has no meaning.)
ID:001	IDLK:002	← Returned response. The ID number is also displayed on the monitor screen.
IDCK000+		← Repeater control
		(If a command is used with repeater control, ID designation using IDSL or
		IDLK is canceled.)
WAIT
ID:001	IDLK:002
ID:002	IDLK:002
ID:003	IDLK:002
ID:004	IDLK:002

ENGLISH

43 E