Manuals / Brands / Computer Equipment / Computer Monitor / Sharp / Computer Equipment / Computer Monitor

Sharp PN-455 Menu option selection, Example of menu operation: Adjusting CONTRAST (video) in the GAIN CONTROL menu, 1. Press MENU to display the menu screen

1 62

Download 62 pages, 3.24 Mb

Menu Items

Menus can be displayed on the screen to enable video and audio adjustment and the setting of various functions using the remote control unit. For more information, refer to the pages where each topic is explained.

Menu option selection

MENU button

• Displays and turns off the menu screen.

• Switches menu screens.

Cursor control (UP/DOWN/LEFT/RIGHT)

• /: Selects a desired item on the screen.

• /: Adjusts the selected item.

Pressing increases a value.

Pressing decreases a value.

Example of menu operation: Adjusting CONTRAST (video) in the GAIN CONTROL menu.1. Press MENU to display the menu screen.

E26

Contents

IMPORTANT INFORMATION WARNING: CAUTION IMPORTANT INFORMATION (Continued) DEAR SHARP CUSTOMER SAFETY PRECAUTIONS SAFETY PRECAUTIONS (Continued) TIPS AND SAFETY PRECAUTIONS Introduction Connection and Installation Basic Operation PC Operation Troubleshooting and Specifications ●HIGH-DEFINITION(HD) LCD PANEL ●ASV*LOW-REFLECTIONBLACK TFT LCD PANEL ●EQUIPPED WITH A VARIETY OF TERMINALS ●ENLARGEMENT FUNCTION ●CHAIN CONNECTION OF MULTIPLE MONITORS Page Front view Rear view Remote control unit Removing the battery cover Remote control operation range INPUT1 (PC DIGITAL) INPUT2 (PC ANALOG) INPUT3 (COMPONENT) INPUT4 (S-VIDEO/VIDEO) PC ANALOG RGB OUTPUT TERMINAL AUDIO OUTPUT TERMINAL Connecting the speaker cables Make sure to connect the speaker jack and cable polarity (, ) properly Connecting the AC cord Connection example Connection example for RS-232C Fastening the AC cord Page Main power switch Turning power on/off using remote control INPUT (Input selection) MUTE MENU VOL (Volume adjustment) BRIGHT (Backlight adjustment) Menu option selection 2. Press MENU to display the GAIN CONTROL menu 3. Press to select CONTRAST 4. Press (or ) to adjust the setting 5. Press MENU more than once to close the menu screen Menu screen explanation Initialization (Reset)/Functional Restriction Setting 1. After pressing for about 5 seconds, press , and 2. Select and set the items you want [ALL RESET] ■ADJUSTMENT (INPUT2) [MANUAL / AUTO] [MANUAL (CLOCK)] [MANUAL (PHASE)] [MANUAL (H-POS)] ■GAIN CONTROL (INPUT2) [MANUAL (BLACK LEVEL)] [MANUAL (CONTRAST)] ■WHITE BALANCE [THRU / COOL / • / STD / • / WARM / USER] (INPUT1 / INPUT2) [CONTRAST] (INPUT3 / INPUT4) [BLACK LEVEL] (INPUT3 / INPUT4) [TINT] (INPUT3 / INPUT4) [COLORS] (INPUT3 / INPUT4) [SHARPNESS] (INPUT3 / INPUT4) ■MODE SELECT [480 LINES] (INPUT2) [768 LINES] (INPUT2) [ENLARGE] (INPUT1/INPUT2) [ENLARGE POS] (INPUT1 / INPUT2) [OFF TIMER] [LANGUAGE] [ID NO SET] ■Switching the screen size (INPUT1 / INPUT2) ZOOM ■Switching the screen size (INPUT3 / INPUT4) Screen display for adjustments (INPUT2) Set-upinformation (INPUT1 / INPUT2) PC connection Communication conditions Communication procedure Basic operation Advanced operation <Commands for ID control Note Example: <Repeater control <Repeater control command <Response format in Advanced operation ■Normal response When control via page 34) ■If a timeout occurs while waiting for a command <Communication interval RS-232Ccommand table Power control/Input selection, etc Picture Adjustment (INPUT1) Picture Adjustment (INPUT2) Picture Adjustment (INPUT3/INPUT4) Special Control Problem Check item Warning when temperature rises Cracking sound ■Product Specifications ■Power management ■DDC (plug and play) ■Screen resolution chart Screen resolution Hsync Vsync Dot frequency ■ PC digital RGB input terminal pins ■ PC analog RGB input terminal pins input terminal pins output terminal pins PC analog RGB output terminal pins Page ■ INPUT1 ■ INPUT2 ■ INPUT3/4