Sharp PN-455 Special Control

Special Control

*can be used in standby mode

Control item		Command	Direction	Parameter	Reply	Control/Response contents	*
			W	0		TIMER OFF
OFF TIMER		OFTM		1-23		OFF TIMER		No
			R		0	TIMER OFF
					1-23	Remaining time
	ID NO.		W	0-255		Sets the monitor’s ID number.		Yes
		IDST
	SETTING		R		0-255	Returns the monitor’s ID number.
	ID NO.			1-255		Sets a monitor ID number. This ID number is only
		IDSL	W			effective for the command immediately after this		Yes
	SETTING					command.
	(ONCE)			0		Clears the ID number if one has been designated.
ID NUMBER	ID NO.			1-255		Sets a monitor ID number. This ID number is
						effective for the next and all subsequent commands
		IDLK	W					Yes
	SETTING					after this command.
	(SUBSEQUENT)			0		Clears the ID number if one has been designated.
	ID CHECK	IDCK	W	0		Displays selected ID number and the monitor’s own		Yes
						ID number on the screen.
Information	MODEL	INF1	R		Value			Yes
	SERIAL NO.	SRNO	R		Value
				0	0	STANDARD
Display mode		BMOD	WR	1	1	OFFICE MODE		Yes
				2	2	VIVID MODE
Brightness		VLMP	WR	0-max value	0-max value	BRIGHTNESS		Yes
Volume		VOLM	WR	0-max value	0-max value			Yes
Mute		MUTE	WR	0	0	OFF		No
				1	1	ON
ALL RESET		RSET	W	0		ALL RESET		No
ADJUSTMENT		ALCK	WR	0	0	OSD DISPLAY ON		Yes
				1	1	OSD DISPLAY OFF
OSD DISPLAY		LOSD	WR	0	0	ADJUSTMENT UNLOCKED		Yes
				1	1	ADJUSTMENT LOCKED
LED OFF		OFLD	WR	0	0	LED ON		Yes
				1	1	LED OFF
			W	0		Initialization
					0	No detectable error has occurred
					1	Standby by remote control
CAUSE OF LAST STANBY		STCA			2	Standby by power switch		Yes
			R		3	Standby by RS-232C
					4	Waiting by No Signal/Out of Timing (Incl: VESA DPMS/DMPM)
					5	Standby by FAN error
					6	Standby by abnormal temperature
	Temperature	ERRT	R		Value	Temperature
Status check
	Fan	ERRF	R		0	No error		No
					1	FAN error

ENGLISH

51 E