Sharp PN-S655 Turning Power On/Off, Turning on the main power, Turning power on/off, Disabling power on/off operations, nDate/time setting

Turning Power On/Off

Caution

•Turn on the monitor first before turning on the PC or playback device.

Turning on the main power

Main power switch

TIPS

•If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode.

•You can turn on/off the monitor by pressing the power switch of the monitor.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•When STANDBY MODE is set to STANDARD, startup time can be reduced. Note, however that, more power will be consumed in standby mode.

nDate/time setting

•If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time.

DATE/TIME SETTING

When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit.

Turning power on/off

Press the POWER button to turn the power ON/OFF.

SET

CANCEL

OK···[MENU]

		INPUT
		Power LED
	Status of a power LED	Status of the monitor
	Green lighting	Power “On”
	Orange lighting	Power “Off” (Standby mode)
	Green flashing	Input signal standby mode
	Green flashing	(input using a PC)
		(input using a PC)

Caution

•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction.

1.Press , , or to select the date andtime, and press or to change the numerical values.2.Select SET and then press MENU .

•Be sure to set the date and time.

•The date/time setting screen will close automatically if no operation is performed for about 15 seconds. The date and time can be set using DATE/TIME SETTING from the OPTION menu when the date/time setting screen disappears.

TIPS

•Set the date in “Year/Month/Day” order.•Set the time on a 24-hour basis.

•The clock stops after the power-off status continues for approximately 1 week.* The date/time setting screen appears at power-on. Be sure to set the date and time.

(* This is a guide. The power-off status that stops the clock depends on the status of the monitor.)

Disabling power on/off operations

Power on/power off operations can be disabled in order to protect the monitor from an accidental power off. Set the ADJUSTMENT LOCK in FUNCTION menu to “2”. (See Operation guide.)

E14