How to Install the Monitor

Mounting precautions

•Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.

•When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

•When moving the monitor, be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury.

•Install the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees.

•Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or mishandling.

•This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside.

 

 

Unit: inch [cm]

 

11-13/16 [30]

1-3/8 [3.5]

 

 

1-

 

1-

15/16

 

15/16

[5]

 

[5]

1-15/16 [5]

•If it is difficult to provide this much space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32 °F (0°C) to 104°F (40°C), install a fan in the housing or take other measures to keep the ambient temperature within the required range.

•Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.

•After mounting, it is recommended to take some measures to prevent the monitor from falling down. Secure the monitor by fastening the hooks at the top of the monitor to a wall or a pillar with strong cord and brackets (not included).

•Do not place the monitor on a device which generates heat.

•This monitor is fiixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monitor is properly mounted.

•Be sure to use a stand or a wall-mount bracket designed or designated for mounting the monitor.

•This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure.

ENGLISH

9 E