Sharp PN-S655 Connecting Peripheral Equipment, Connection with a PC, Connection with AV equipment, input, Video, input, input, Video, input, @ 50Hz, terminal, terminal

Connecting Peripheral Equipment

Caution

•Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected.

•Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and the other problems.

Connection with a PC

input	PC1 input terminal	PC2 input terminal
input
Video		V	H
Video
		R	G B
	PC3 input terminal	PC4 input terminals
input
Audio	PC audio input terminal
	PC audio input terminal

•Use a commercially available signal cable (DVI-D 24 pin) for the PC1 input terminal. Set DVI SELECT of INPUT SELECT on the OPTION menu to PC1 DVI-D when using the PC1 input terminal. (See Operation guide.)

•Use a commercially available HDMI cable (conforming to the HDMI standard) for the PC2 input terminal. Set HDMI SELECT of INPUT SELECT on the OPTION menu to PC2 HDMI when using the PC2 input terminal. In addition, select the audio input terminal to be used in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu. (See

Operation guide.) When DIGITAL is selected, connection to the PC audio input terminal is unnecessary.

•Use a commercially available signal cable (Mini D-sub15 pin) for the PC3 input terminal.

•Use a commercially available signal cable (BNC) for the PC4 input terminals. Set BNC SELECT of INPUT SELECT on the OPTION menu to PC4 RGB when using the PC4 input terminals. (See Operation guide.)

•Use a commercially available audio cable (mini stereo jack) for the PC audio input terminal. Use an audio cable without resistance.

TIPS

•Images may not be displayed properly depending on the computer (graphics board) to be connected.

•A screen with 1920 x 1080 resolution may not be displayed correctly on PC4. In this case, check the settings of your computer (graphics board) to verify that input signals conform to specifications of this monitor. (See page 17.)

•If there is a check box to disable EDID in display control panel, check it when using PC4.

•Use the automatic screen adjustment when a PC screen is displayed for the first time using PC3 or PC4, or when the setting of the PC is changed. (See Operation guide.)

The screen is adjusted automatically when SELF ADJUSTin the OPTION menu is set to ON. (See Operation guide.)

Connection with AV equipment

input				Cr/Pr Y Cb/Pb
	AV1 input	AV2 input		AV3 input
	terminal	terminal		terminals
Video
	AV4 input terminal		AV5 input terminal
input
Audio		AV audio input terminals
		AV audio input terminals

•Use a commercially available signal cable (DVI-D 24 pin) for the AV1 input terminal. Set DVI SELECT of INPUT SELECT on the OPTION menu to AV1 DVI-D when using the AV1 input terminal. (See Operation guide.)

•Use a commercially available HDMI cable (conforming to the HDMI standard) for the AV2 input terminal. Set HDMI SELECT of INPUT SELECT on the OPTION menu to AV2 HDMI when using the AV2 input terminal. In addition, select the audio input terminal to be used in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu. (See

Operation guide.) When DIGITAL is selected, connection to the AV audio input terminal is unnecessary.

•Use a commercially available component cable (BNC) for the AV3 input terminals. Set BNC SELECT of INPUT

SELECT on the OPTION menu to AV3 COMPONENT when using the AV3 input terminals. (See Operation guide.)

•Use a commercially available S-video cable for the AV4 input terminal.•Use a commercially available video cable (BNC) for theAV5 input terminal.

•Use a commercially available audio cable (RCA) for the AV audio input terminals.

•The AV1/AV2 input terminals are compatible with the video signals below:1920 x 1080 p @ 50/59.94/60 Hz1920 x 1080 i @ 50/59.94/60 Hz1280 x 720 p @ 50/59.94/60 Hz720 x 576 p @ 50 Hz720 x 480 p @ 59.94/60 Hz640 x 480 p @ 59.94/60 Hz•The AV2 input terminal is also compatible with the video signals below:1920 x 1080p @ 24Hz

720(1440) x	576i	@ 50Hz
720(1440) x	480i	@ 59.94/60Hz

•The AV3 input terminals are compatible with the video signals below:1080p @50/60Hz, 1080i @50/60Hz, 720p @50/60Hz,576p @50Hz, 576i @50Hz, 480p @60Hz, 480i @60Hz

E10