TIPS

The length of the signal cables or surrounding environment may affect the image quality.

The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

When connecting monitors in a daisy chain set AUTO INPUT CHANGE to OFF.

Video output is disabled in the following cases: When the power is turned off

When the monitor is in input signal waiting mode

10. LAN terminal

You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.

11. External speaker terminals

Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 10 W.

1

2

3

 

Approx.

 

 

3-15/16 inch

 

 

(10 cm)

 

1.Attach a speaker cable core (included with the PN-ZB02) to the end of the speaker cable connected to the monitor.

2.While pushing the tab, insert the tip of the cable.

3.Release the tab.

TIPS

Be sure to connect the + and - terminals and the left and right speakers properly.

Avoid short circuiting the + and - terminals.

12.Audio1 input terminals

13.Audio2 input terminals

Set the audio input terminal to be used in each input mode in AUDIO SELECT on the OPTION menu.

14. PC RGB input terminals

Set BNC of INPUT SELECT on the OPTION menu to PC RGB when using the PC RGB input terminals.

Select the audio input terminal to be used in PC RGB of AUDIO SELECT on the OPTION menu.

15. AV component input terminals

Set BNC of INPUT SELECT on the OPTION menu to AV COMPONENT when using the AV component input terminals.

Select the audio input terminal to be used in AV COMPONENT of AUDIO SELECT on the OPTION menu.

Cannot be used when D-SUB in INPUT SELECT on the OPTION menu is set to AV COMPONENT.

16. AV video input terminal

Select the audio input terminal to be used in AV VIDEO of AUDIO SELECT on the OPTION menu.

Cannot be used when D-SUB in INPUT SELECT on the OPTION menu is set to AV VIDEO.

17. AV S-video input terminal

Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu.

Connecting Peripheral Equipment

Multiple monitor connection

The monitors can be aligned and used as a large screen.

[Example]

Remote control sensor box

(Supplied with the PN-ZR01 (optional))

Second monitor

First monitor

Secondary

Primary

(Expansion unit)

(Main unit)

ID No.: 2

ID No.: 1

 

 

Third monitor

Fourth monitor

Secondary

Secondary

(Expansion unit)

(Expansion unit)

ID No.: 3

ID No.: 4

 

 

TIPS

Connect the RS-232C cables in order, starting with the first monitor (primary monitor). If monitors are connected in a different order they may not be operable.

Always install the remote control sensor box on the primary monitor.

■ Connection with video cable

May vary depending on the system being used.

If using the PC/AV DVI-D terminal, up to 5 monitors can be connected in a daisy chain. (When the PN-ZB02 is attached)

First monitor

Second monitor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PC/AV DVI-D

PC/AV DVI-D

PC/AV DVI-D

input terminal

output terminal

input terminal

Digital signal (DVI) cables (commercially available)

To PC digital RGB output terminal

shows the signal flow

13 E

Page 13
Image 13
Sharp PN-V602 13 E, Multiple monitor connection, Connecting Peripheral Equipment, Connection with video cable