Sharp R-1200, R-1201 operation manual E a N I N G a N D C a R E, P L a C I N G P a R T S

Models: R-1201 R-1200

1 32
Download 32 pages 47.03 Kb
Page 26
Image 26

C L E A N I N G A N D C A R E

Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning.

Exterior

The outside surface is precoated steel and plastic. Clean the outside with mild soap and water; rinse and dry with a soft cloth. Do not use any type of household or abrasive cleaner.

Door

Be careful with the edge of the oven door as it is glass and could chip or break. Wipe the window on both sides with a damp cloth to remove any spills or spatters. Metal parts will be easier to maintain if wiped frequently with a damp cloth. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface.

Touch Control Panel

Wipe the panel with a cloth dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close door and touch

STOP/CLEAR.

rack can be cleaned with hot soapy water, rinsed and dried.

Odor Removal

Occasionally, a cooking odor may remain in the oven. To remove, combine 1 cup water, grated peel and juice of 1 lemon and several whole cloves in a 2-cup glass measuring cup. Boil for several minutes using 100% power. Allow to set in oven until cool. Wipe interior with a soft cloth.

Turntable/Turntable Support

The turntable and turntable support can be removed for easy cleaning. Wash them in mild, sudsy water; for stubborn stains use a mild cleanser and non-abrasive scouring sponge. They are also dishwasher-proof. Use upper rack of dishwasher. The turntable motor shaft is not sealed, so excess water or spills should be wiped up immediately.

Interior

Cleaning is easy because little heat is generated to the interior surfaces; therefore, there is no baking and setting of spills or spattering. To clean the interior surfaces, wipe with a soft cloth and warm water. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil, use baking soda or a mild soap; rinse thoroughly with hot water. The

Waveguide Cover

The waveguide cover is located on the right side wall of the oven cavity. It is made from mica so requires special care. Keep the waveguide cover clean to as- sure good oven performance. Carefully wipe with a damp cloth any food spatters from the surface of the cover immediately after they occur. Built-up splashes may overheat and cause smoke or possibly catch fire.

DO NOT REMOVE THE WAVEGUIDE COVER.

R E P L A C I N G P A R T S

ACCENT LIGHT AND

TASK LIGHT

1.To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging.

2.To release cover, remove the screw on the light cover. (See illustration.)

3.Replace light bulbs with equivalent watt bulb available from your Sharp Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS.

4.Close light cover and secure with screw removed in step 2.

CAUTION: Light cover may become very hot. Do not touch glass when light is on.

Light cover

Screw

Light bulbs

26

Page 26
Image 26
Sharp R-1200, R-1201 operation manual E a N I N G a N D C a R E, P L a C I N G P a R T S

R-1201, R-1200 specifications

The Sharp R-1200 and R-1201 microwave ovens represent a fusion of advanced cooking technology and user-friendly design, catering to modern kitchen needs. These models stand out for their efficiency and innovative features, making meal preparation a seamless experience.

One of the key characteristics of the Sharp R-1200 and R-1201 is their powerful cooking performance. Both models are equipped with a high wattage of up to 1000 watts, ensuring quick and even heating of a variety of foods. This power level allows users to cook, reheat, and defrost with speed and precision, making them ideal for busy households.

Both models incorporate Sharp's patented Carousel turntable, which promotes better cooking performance by ensuring food is evenly cooked from all sides. This system not only enhances cooking efficiency but also minimizes cold spots, ensuring a consistently delicious outcome every time.

Another standout feature of the R-1200 and R-1201 is their user-friendly control panel. With straightforward dial and button controls, users can easily select cooking times and power levels without confusion. The clear LED display provides visibility, allowing users to monitor their cooking progress at a glance.

In addition to standard cooking functions, these microwaves offer multiple cooking presets that cater to various food types, ranging from popcorn to pizza. This versatility means users can enjoy customized cooking experiences based on their specific preferences. The automatic sensor cooking technology further enhances usability by adjusting cooking time and power based on the moisture released from the food, resulting in optimal cooking results.

Safety is also a priority with the Sharp R-1200 and R-1201 models. They come equipped with a child safety lock feature, ensuring peace of mind in homes with young children. This aspect, combined with the durable design and easy-clean interior, makes maintenance a breeze and enhances the long-term reliability of the product.

Overall, the Sharp R-1200 and R-1201 microwave ovens showcase a balance of technological innovation and practical features. Their efficient cooking capabilities, user-friendly controls, and versatile cooking settings make them an excellent addition to any kitchen, streamlining meal preparation and enhancing culinary creativity.