U N P A C K I N G A N D I N S T A L L A T I O N I N S T R U C T I O N S
5 TOOLS RECOMMENDED FOR INSTALLATION
•Phillips Screwdriver
•Electric Drill
•1/2”, 5/8” and 3/32” Drill Bits
•
•Saw to cut exhaust opening (if needed)
•Protective Drop Cloth for product and range - you may also use carton for protection
•Scissors
•Pencil
•Measure
•Tape
6 INSTALLATION HARDWARE
The INSTALLATION HARDWARE items 1 - 7 are in a small bag. Items 8 - " are packed separately. All items are in a small carton packed below the oven.
ITEM | NAME | QUANTITY | PART CODE | |
1 | Wood Screw 5 X 30 mm | 6 | XTSSD50P35000 | |
2 | Toggle Bolt with nuts #10 - 24 X 50 mm | 4 | ||
3 | Top Cabinet Screw 5 X 60 mm | 2 | XBRSD50P60000 | |
4 | Power Cord Hanger | 1 | ||
5 | Tapping Screw 4 x 12 mm | 3 | XOTSD40P12000 | |
6 | Flat Washer 30 mm diameter | 2 | ||
7 | Grommet |
| 1 | LBSHC0040MRE0 |
8 | Rear Cushion | 1 | PCUSUB059MRP0 | |
9 | Exhaust Damper Assembly | 1 | ||
! Scale Plate | 2 | |||
" Grease Filter | 2 |
Figure 4
Parts shown not to common scale.
8