R E P L A C I N G P A R T S

CHARCOAL FILTER

Charcoal Filter, Sharp Part number RK-230 which was enclosed with your oven, is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months depending on use. See page 6 for ordering information.

1.Disconnect power to the oven at the circuit breaker panel or by unplugging.

2.Remove center screw from the top center of the louver and push down carefully on the tab at each end of the louver to disengage.

3.Pull the louver away from the unit.

4.Change the charcoal filter.

5.To replace, insert the top tabs of hood louver into the 3 openings on the cavity faceplate holding louver at a slightly outward tilt. Rotate louver so the top tabs are positoned in the cavity faceplate openings. Push in the bottom of louver to ensure that the three bottom clips snap into the cavity faceplate. Check for proper engagement and replace the screw removed in step 2.

Top tabs

Oven light

Screw

3.Remove old light bulb and replace only with equivalent watt bulb available from a Sharp Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE BULB LARGER THAN 30 WATTS.

4.Replace the oven light cover by carefully pushing into place. Replace the charcoal filter, if used. Push the louver back into place and replace the louver mounting screw.

WORK LIGHT AND

NIGHT LIGHT

1.To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging.

2.To release cover, remove the screw on the light cover. (See illustration.)

3.Replace light bulbs with equivalent watt bulb available from your Sharp Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS.

4.Close light cover and secure with screw removed in step 2.

CAUTION: Light cover may become very hot. Do not touch glass when light is on.

Cavity faceplate

Hood louver

Charcoal

filter

Bottom clips

OVEN LIGHT

 

 

 

Remove the louver per instructions 1-3 above and

 

 

 

charcoal filter, if used.

Light cover

 

Light bulbs

1. To replace light bulb, first disconnect power to the

 

 

Screw

 

 

oven at the circuit breaker panel or by unplugging.

 

 

 

2.Open light cover located behind filter mounting by carefully pulling up on the front edge.

36

Page 35 Page 37
Page 36
Image 36
Sharp R-1754, R-1750, R-1751, R-1752 manual P L a C I N G P a R T S, Charcoal Filter, Work Light Night Light, Oven Light
Page 35 Page 37

R-1752, R-1751, R-1750, R-1754 specifications

The Sharp R-1754, R-1750, R-1751, and R-1752 are a series of microwave ovens that showcase Sharp’s commitment to innovation, efficiency, and user-friendly design. These models blend advanced technology with practical features, making them suitable for modern kitchens.

The Sharp R-1754 is particularly notable for its combination of microwave and convection cooking, allowing users to enjoy the convenience of traditional microwave cooking alongside the superior browning and crisping capabilities of convection. It boasts a generous capacity, making it ideal for families or individuals who entertain frequently. Equipped with a range of preset cooking modes, the R-1754 simplifies meal preparation, enabling users to heat, cook, and defrost a variety of foods effortlessly. Its sleek design and user-friendly control panel enhance the overall user experience, ensuring that even novice cooks can navigate the settings easily.

Following suit, the R-1750, R-1751, and R-1752 models feature similar core technologies but differ slightly in design and capacity. These microwaves maintain the same reliable cooking performance, which includes a high power output for efficient cooking and reheating. The R-1751 and R-1752 models, in particular, offer specific pre-programmed settings for common tasks such as popcorn, pizza, and beverages, highlighting Sharp’s attention to convenience and ease of use.

A standout characteristic across this series is Sharp’s innovative Inverter Technology. Unlike traditional microwaves that use a pulsing method to regulate power, Inverter Technology delivers a steady stream of cooking power. This results in even cooking and defrosting, preserving the flavor and texture of the food. Users can look forward to more consistent results, particularly with delicate items that can easily be overcooked.

The exterior design of these models is equally impressive, typically featuring stainless steel finishes that offer a modern aesthetic while ensuring durability. The spacious interiors are easy to clean, often equipped with a non-stick coating.

In summary, the Sharp R-1754, R-1750, R-1751, and R-1752 are reliable microwave ovens that combine advanced technologies with practical features. Their focus on user-friendliness, efficient cooking, and modern aesthetics makes them a commendable choice for anyone looking to upgrade their kitchen appliances.
Top Page Image Contents