Modern-Aire Ventilating Corporation 7319 Lankershim Blvd.
North Hollywood, CA 91605
Phone: (818) 765-9870 Fax: (818) 765-4916

U N P A C K I N G I N S T R U C T I O N S

Unpacking and Examining Your Oven

Open the bottom of the carton, bend the carton flaps back and tilt the oven over to rest on plasticfoam pad. Lift carton off oven and remove all packing materials, Installation Instructions, Wall Template, Top Template, Charcoal Filter, Turntable and Turntable Support. SAVE THE CARTON AS IT

MAY MAKE INSTALLATION EASIER.

1.Remove the feature sticker from the outside of the door, if there is one.

2.DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the ceiling in the oven cavity. Check to see that there are Installation Instructions,

Wall Template, Top Template and RK-230 Charcoal Filter, which is used when recirculating is chosen. Read enclosures and SAVE the Operation Manual.

Check the oven for any damage, such as misaligned or bent door, damaged door

seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven

and contact your dealer or SHARP AUTHORIZED SERVICER. See Installation Instructions for more details.

O P T I O N A L A C C E S S O R I E S

Two optional accessories are available for this oven.

1.Charcoal Filter (RK-230). The filter packed in the oven is required when hood exhaust is recirculated. See Charcoal Filter on page 36. To purchase a replacement Charcoal Filter, check with the dealer or call 1-800-642-2122. Have credit card ready.

2.Filler Panel Kit. For use when the oven is installed in a 36-inch or 42-inch wide opening. The metal filler panels come in 3-inch wide pairs. One set is needed for a 36-inch opening and 2 sets for a 42-inch opening. White and black are available.

To purchase contact:

G R O U N D I N G I N S T R U C T I O N S

This appliance must be grounded. This oven is equipped with a cord having a grounding wire with a grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.

WARNING Improper use of the grounding plug can result in a risk of electric shock.

Electrical Requirements

Check Installation Instructions for proper location for the power supply.

The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. or more protected electrical supply. It is recommended that a separate circuit serving only the oven be provided.

The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE GROUNDING PIN FROM THE PLUG.

Notes: 1. If you have any questions about the grounding or electrical instructions, consult a qualified electri- cian or service person.

2.Neither Sharp nor the dealer can accept any liability for damage to the oven or personal injury result- ing from failure to observe the correct electrical connection procedures.

Radio or TV Interference

Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave oven is on a different electrical circuit, relocate the radio or TV as far away from the oven as feasible or check position and signal of receiving antenna.

6

Page 6
Image 6
Sharp R-1751, R-1754, R-1750, R-1752 manual P a C K I N G I N S T R U C T I O N S, T I O N a L a C C E S S O R I E S

R-1752, R-1751, R-1750, R-1754 specifications

The Sharp R-1754, R-1750, R-1751, and R-1752 are a series of microwave ovens that showcase Sharp’s commitment to innovation, efficiency, and user-friendly design. These models blend advanced technology with practical features, making them suitable for modern kitchens.

The Sharp R-1754 is particularly notable for its combination of microwave and convection cooking, allowing users to enjoy the convenience of traditional microwave cooking alongside the superior browning and crisping capabilities of convection. It boasts a generous capacity, making it ideal for families or individuals who entertain frequently. Equipped with a range of preset cooking modes, the R-1754 simplifies meal preparation, enabling users to heat, cook, and defrost a variety of foods effortlessly. Its sleek design and user-friendly control panel enhance the overall user experience, ensuring that even novice cooks can navigate the settings easily.

Following suit, the R-1750, R-1751, and R-1752 models feature similar core technologies but differ slightly in design and capacity. These microwaves maintain the same reliable cooking performance, which includes a high power output for efficient cooking and reheating. The R-1751 and R-1752 models, in particular, offer specific pre-programmed settings for common tasks such as popcorn, pizza, and beverages, highlighting Sharp’s attention to convenience and ease of use.

A standout characteristic across this series is Sharp’s innovative Inverter Technology. Unlike traditional microwaves that use a pulsing method to regulate power, Inverter Technology delivers a steady stream of cooking power. This results in even cooking and defrosting, preserving the flavor and texture of the food. Users can look forward to more consistent results, particularly with delicate items that can easily be overcooked.

The exterior design of these models is equally impressive, typically featuring stainless steel finishes that offer a modern aesthetic while ensuring durability. The spacious interiors are easy to clean, often equipped with a non-stick coating.

In summary, the Sharp R-1754, R-1750, R-1751, and R-1752 are reliable microwave ovens that combine advanced technologies with practical features. Their focus on user-friendliness, efficient cooking, and modern aesthetics makes them a commendable choice for anyone looking to upgrade their kitchen appliances.