Sharp R-390H(S) Important Safety Instructions, Read Carefully And Keep For Future Reference

Models: R-390H(S)

1 43
Download 43 pages 53.61 Kb
Page 4
Image 4
IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

Warning

To avoid the danger of fire

1.The microwave oven should not be left unattended during operation. Power levels that are too high or cooking times that are too long may overheat foods resulting in a fire.

2.This oven is not designed to be built-in to a wall or cabinet.

3.The electrical outlet must be readily accessible so that the unit can be unplugged easily in an emer- gency.

4.The AC power supply must be 220V, 50Hz.

5.It is recommended that a separate circuit serving only this appliance be provided.

6.Do not place the oven in areas where heat is generated. For example, close to a conventional oven.

7.Do not install the oven in an area of high humidity or where moisture may collect.

8.Do not store or use the oven outdoors.

9.If food being heated in the oven begins to smoke, DO NOT OPEN THE DOOR. Turn off and unplug the oven and wait until the food has stopped smoking. Opening the door while food is smoking may cause a fire.

10.Use only microwave-safe containers and utensils.

11.Do not leave the oven unattended when using disposable plastic, paper or other combusti- ble food containers.

12.Clean the waveguide cover, the oven cavity, the turntable and roller stay after use. These must be dry and free from grease. Built-up grease may overheat and begin to smoke or catch fire.

13.Do not place flammable materials near the oven or ventilation openings.

14.Do not block the ventilation openings.

15.Remove all metallic seals, wire twists, etc., from food and food packages. Arcing on metallic surfaces may cause a fire.

16.Do not use the microwave oven to fry with oil or heat oil for deep frying. The temperature can not be controlled and the oil may catch fire.

17.To make popcorn, use only special microwave makers.

18.Do not store food or any other items inside the oven.

19.Check the settings after you start the oven to ensure the oven is operating as desired.

20.Do not put things on top or cover the outer cabinet.

21.To avoid overheating and fire, special care must be taken when cooking or reheating foods with a high sugar or fat content, for example, Sausage rolls, Pies or christmas pudding.

To avoid the possibility of injury

1.Do not operate the oven if it is damaged or malfunctioning. Check the following before use.

(1)The door (not warped)

(2)The hinges and safety door latches (not broken or loose)

(3)The door seals and sealing surfaces

(4)The oven cavity (not dented)

(5)The power supply cord or plug

2.Do not try to adjust or repair the oven yourself. It is hazardous for anyone other than a qualified service technician trained by SHARP to carry out any service or repair operation.

Especially those which involve the removal of a cover which gives protection against exposure to microwave energy are very hazardous.

3.Do not operate the oven with the door open or alter the safety door latches in any way.

4.Do not operate the oven if there is an object between the door seals and sealing surfaces.

5.Do not allow grease or dirt to build up on the door seals and sealing surfaces.

6.Individuals with PACEMAKERS should check with their doctor or the manufacturer of the pace- maker for precautions regarding microwave ovens.

To avoid the possibility of electric shock

1.Under no circumstances should you remove the outer cabinet.

2.Never spill or insert any objects into the door lock openings or ventilation openings. In the event of a spill, turn off and unplug the oven immediately, and call a SERVICE CENTRE APPROVED BY SHARP.

3.Do not immerse the power supply cord or plug in water or any other liquid.

4.Do not let the power supply cord hang over the edge of a table or counter.

5.Keep the power supply cord away from heated surfaces.

6.If the oven lamp fails, consult your dealer or a qualified service technician trained by SHARP.

7.Should the power supply cord become damaged, it must be replaced with a special cord supplied by a SERVICE CENTRE APPROVED BY SHARP. And it must be replaced by a qualified service technician trained by SHARP.

2

Page 4
Image 4
Sharp R-390H(S) Important Safety Instructions, Read Carefully And Keep For Future Reference, To avoid the danger of fire