Sharp R-508F B E F O R E O P E R A T I N G, 1230, Stop/Clear, To Set The Clock, Time Cooking

B E F O R E O P E R A T I N G

•Before operating your new microwave oven make sure you read and understand this operation manual completely.

•Before the oven can be used, follow these procedures:

1. Plug in the oven. Close the door. The oven display will then begin flashing 8 8 : 8 8 .

2.Touch the STOP/CLEAR pad.

:will appear.

3.Set clock.

STOP/CLEAR

Touch the STOP/CLEAR pad to:

1.Erase if you make a mistake during programming.

2.Cancel timer.

3.Stop the oven temporarily during cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice.

TO SET THE CLOCK

•Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).

	P R O C E D U R E		D I S P L A Y
1		TIMER	: 0
		CLOCK

Touch CLOCK pad.

2	1	2	3	0	12:30
Enter the correct time
of day by touching the
numbers in sequence.

3 TIMER	12:30
CLOCK

Touch CLOCK pad again.

This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time.

•If the electrical power supply to your microwave oven should be interrupted, the display will intermittently

show 8 8 : 8 8 after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day.

TIME COOKING

Your oven can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros.

•Suppose you want to cook for 5 minutes at 100%.

P R O C E D U R ED I S P L A Y

1	5	0	0	15 . 00
	Enter cooking time.
2		START		15 . 00
				COOK DEFROST
	Touch START pad.

9