47
CX1H_UK42-48.fm00/12/17
MD Editing
Editing a Recorded MiniDisc
To move the programmed tracks
Note:
If a track is programmed twice or more, the first instruction will precede to the oth-
ers.
To erase one track
Caution:
Once a track has been erased, it cannot be recovered. Check the track number
bef ore erasing it.
Notes:
When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.
When a track is erased, the track name will be erased at the same time.
It is also possible to erase tracks by selecting either menu of "ERASE" or "ALL
ERASE" with the NAME/TOC EDIT button on the remote control.
1Programme the tracks you want to move. (See page 25.)
2Press the NAME/TOC EDIT button.
3Within 10 seconds, press the ENTER button.
To cancel the operation, press the NAME/TOC EDIT button.
4Press the ENTER button again.
Tracks are rearranged.
The programmed tracks will come to the top of the disc.
1Whilst in the stop mode, select the track you want to erase by
pressing the or button. Or start playing the track to be
erased , an d the n pre ss the MD button to enter the paus e m ode .
2Press the ERASE button.
To cancel the operation, press the MD button.
3Press the ERASE button for 2 seconds or more.
The track is erased, and the unit is stopped at the beginning of the next track.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)