57
CX1H_UK49-59.fm00/12/17
References
Error Messages
Error Messages
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD Nothing is re co rded. (Neither
music nor disc name is re-
corded.)
Replace it with another disc.
Can't COPY You tried to record from a
copy prohibited CD. Replace the CD.
Can't EDIT A track cannot be edited. Change the st op position of the
track and then try editing it.
Can't READ* The disc is damaged. Replace it with another disc.
(*: Number or
symbol) TOC information cannot be
read. Erase the disc and t ry recording
again.
MiniDisc not sp ecified.
Can't REC Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
Re-record or replace the Mi-
niDisc.
Can't T REC Timer recording i s impossible
or there is no available space
on the MD.
Replace it with another recorda-
ble disc.
The disc is out of recording
space.
Can't WRITE The TOC information could
not be creat ed properly due to
a mechanical shock or to
scratches on the disc.
Set this unit to the stand-by
mode and try to write the TOC
again. (Re m ove any source of
shock or vibr ation whil st writing.)
CD NO DISC A CD has not been loaded. Load a CD.
The CD data cannot be read. Reload the CD.
DISC FULL The disc is out of recording
space. Replace the disc with another
recordable disc.
EDIT OVER You chose 21 or more tra cks
for track editing. Decrease t he number of tracks.
Er - MD ** A MiniDisc is not worki ng
properly. Press the MD button.
(**: Number or
symbol) Set this unit to the stand-by
mode and tur n the power on
again.
Error messages Meaning Remedy
MD NO DISC A MiniDis c has not been load-
ed. Load a MiniDisc.
The MiniDisc data cannot be
read. Reload the MiniDisc.
NAME FULL The number of characters for
the disc name or t rack name
exceeds 40.
Shorten the disc or track name.
NOT AUDIO The data recorded on this disc
is not audio data. Replace the disc.
PLAYBACK MD You tried to record on a play-
back-only disc . Replace it with another recorda-
ble disc.
POWER ? A MiniDisc is not worki ng
properly. Set this unit to the stand-by
mode and tur n the power on
again.
PROTECTED The disc is write protected. Move the write protection tab
back to its original position.
TEMP OVER The temperature is too high . Set this unit to the stand-by
mode and wait for a whilst.
TOC FORM ** TOC inform ation recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.
Replace it with another disc.
(**: Number or
symbol) Erase the dis c and try re cording
again.
TOC FULL There is no space left for re-
cording track numbers. Replace it with another recorda-
ble disc.
TOC FULL 1 There is no space left for re-
cording character information. Replace it with another recorda-
ble disc.
Erase the ne edless character s.
? MD DISC The data contains an error. Press the MD button.
MiniDisc not sp ecified. Replace it with another disc.