Sharp manual RF Circuit Description of SGH-T519

5.Circuit Description

<RF Circuit Description of SGH-T519 >

1.FEM (F100)

==> Switching Tx, Rx path for GSM850, EGSM900, DCS1800 and PCS1900 controlled by logic.

Integration of GSM850, EGSM900, DCS1800 and PCS1900 RX SAW Filters.

To convert Electromagnetic Field Wave to Acoustic Wave and the pass the specific frequency band.

-for filtering the frequency band 824 ~ 849 / 869 ~ 894 MHz

-for filtering the frequency band 880 ~ 915 / 925 ~ 960 MHz

-for filtering the frequency band 1710 ~ 1785 / 1805 ~ 1880 MHz

-for filtering the frequency band 1850 ~ 1910 / 1930 ~ 1990 MHz

2.FEM Control Logic ==> Truth Table

	VC1	VC2	VC3
GSM850 Rx Mode	L	L	H
EGSM900	L	L	L
GSM850/EGSM900 Tx Mode	L	H	L
DCS/PCS Rx Mode	L	L	L
DCS/PCS Tx Mode	H	L	L

3.VC-TCXO(TCX400)

==> To generate the 26 MHz reference clock to drive the logic and RF.

4.SKY74137 (UCD100)

==> The sky74137 is a RF tranceiver IC for GS850, EGSM900 DCS1800

and PCS1900 quardband cellular systems, and incorporates EDGE tranceiver capabillity, and integrates most of the low power silicon functions of a tranceiver. The receive path implements a direct downconversion architecture. The transceiver consists of four integrated Low Noise Amplifiers (LNAs), a quadrature demodulator, selectable baseband filter bandwidths, and lowdroop DC Offset Correction (DCOC) sequencer.

- RX Function

Four LNAs which support different bands of operation have separated differential inputs. The LNA outputs feed into a quadrature demodulator that down-converts the RF signals directly to baseband. The baseband I and Q paths consist of cascaded amplifiers and low pass filter sections. All baseband filtering is provided on-chip using no external capacitors.

5-1

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization