Sharp SJ-GC440V Operation, Care And Cleaning, Controlling temperature, Hints when making ice

Models: SJ-SC480V SJ-GC440V SJ-GC480V SJ-SC440V

1 104
Download 104 pages 1.72 Kb
Page 7
Image 7
OPERATION
Clean the magnetic door seal with a toothbrush and warm soapy dishwashing water.

OPERATION

Controlling temperature

Adjustable by turning each knob.

Hints when making ice

1 Do not over fill the Ice cube trays; otherwise the ice cubes will be joined together when frozen.

2 When the ice cubes are made, turn the lever clockwise to empty the ice into the Ice cube box.

NOTE

Lever

Ice cube box

(for refrigerator)

(for freezer)

To prevent damage to the Ice cube box, do not make ice in the Ice cube box or pour oil into it.

Door Alarm

When the refrigerator or freezer door is left open, the door alarm will sound.

The door alarm will sound in 1 minute after opening the door and again after 1 minute (once in each case).

If the door is left open for approx. 3 minutes, the alarm will sound continuously.

Deodorizing unit

Deodorizing catalyst is installed on the routes of cold air. No operation and cleaning are required.

Plasmacluster

The Plasmacluster automatically starts operating when the refrigerator is powered on.

Notes about Plasmacluster operation

The ionizer inside your refrigerator releases clusters of ions, which are collective masses of positive and negative ions, into the refrigerator compartment. These ion clusters inactivate airborne mold fungus.

Controlling temperatureHints when making iceDoor Alarm moldDeodorizing unitPlasmaclusterNotes about Plasmacluster operation fungus CARE AND CLEANING

There may be a slight odor in the refrigerator. This is the smell of ozone generated by the ionizer. The amount of ozone is minimal, and quickly decomposes in the refrigerator.

CARE AND CLEANING

WARNING

Unplug the refrigerator first to prevent electric shock.

Do not splash water directly on the outer cabinet or the interior . This may lead to rusting and deterioration of the electrical insulation .

IMPORTANT

To prevent cracking on inside surfaces and plastic components, follow these tips .

NOTE

To prevent damage to your refrigerator, do not use heavy duty cleansers or solvents (lacquer, paint, polishing powder, benzine, boiled water, etc.)

If the power supply is disconnected, please wait for at least 5 minutes before re-connecting power.

The glass shelves weigh approximately 2kg each. Hold firmly when removing from the cabinet or carrying.

Do not drop objects inside the refrigerator or strike the inner wall. This may cause the inner surface to crack.

Wipe any food oils adhered to plastic components.

Some household chemicals may cause damage, so use only diluted washing-up liquid (soapy water).

If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result.

1 Remove the accessories e.g. shelves from the cabinet and door. Wash them in warm soapy dishwashing water; rinse in clean water and dry.

2 Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to wipe off soapy water.

3 Wipe the exterior with a soft cloth each time it is soiled.

4

Defrosting

Defrosting is fully automatic due to a unique energy saving system.

When the compartment light is blown

Contact the service agent approved by SHARP to request a replacement compartment light. The compartment light is not to be removed other than by qualified service personnel.

Switching off your refrigerator

If you switch your refrigerator off when you are going away for an extended period, remove all food, clean the interior thoroughly. Remove the power cord plug from the power socket and leave all doors open.

7

Page 7
Image 7
Sharp SJ-GC440V Operation, Care And Cleaning, Controlling temperature, Hints when making ice, Door Alarm, Deodorizing unit