Placing the speaker system
There is no distinction between the right and left speakers.
Left speaker Main unit Right speaker
Subwoofer
Floor | Table |
Note:
The speaker grilles are not removable.
AC power connection
After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode.
AC outlet
(AC 120 V ~ 60 Hz)
Notes:
The unit will start the tape initialization when plugged in to the AC outlet. During this process, initializing sound will be heard and the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit
for improved cooling. Please do not cover the opening of the fan with any obstacles, as this will block proper ventilation.
Demonstration mode
The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll and the subwoofer and front speaker will light up in flashing mode.
To cancel the demonstration mode:
When the unit is in the power
consumption mode and the subwoofer and front speaker light up will be off.
To return to the demonstration mode:
When the unit is in the power
Note:
When the power is on, the
Outdoor FM antenna
Use an outdoor FM antenna if you require better reception. Consult your dealer.
ANTENNA
FM | GND AM |
Outdoor
FM antenna
75 OHMS
75 ohms
coaxial cable
Note:
When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.
Preparation for Use
13
