Sharp SW340 General control, Operation, Basic, Surround mode, To turn the power on, Equalizer

General control

CD-SW340

Volume control

Main unit operation:

When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease.

Remote control operation:

Press the VOLUME (+ or –) button to increase or decrease the volume.

Surround mode

When the X-BASS (SURROUND)/ DEMO button is pressed, the unit will enter the surround mode and adjust low bass and high frequency automatically according to volume input. To cancel this mode, press the X-BASS (SURROUND)/ DEMO button again.

0 ..... 30 MAXIMUM

X-BASS

Operation

To turn the power on

Press the ON/STAND-BY button to turn the power on.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Illumination light control

When the power is turned on, light illuminates around the display. To turn on/off the light, hold down the CLEAR/DIMMER button on the remote control for 2 seconds or more.

Subwoofer and front speaker light up control

The subwoofer and front speaker will light up according to the level of the music source played back. To turn on/off the light, hold down the CLEAR/DIMMER button on the remote control for 2 seconds or more.

Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

Equalizer

When the power is first turned on, the unit will enter FLAT mode. When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears.

FLAT No equalization.

ROCK For rock music.

CLASSIC For classical music.

POPS For Pop music.

VOCALS	Vocals are enhanced.
JAZZ	For Jazz.

Note:

If the EQUALIZER MODE button is pressed in the surround mode, it will be canceled automatically.

Basic

15