Sharp SW340 operation manual disc, Programmed play, MP3/WMA

Programmed play

You can choose up to 32 selections for playback in the order you like.

1While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.

2 Press one of the 1 - 5 buttons to select the desired disc.

Selected disc number

3Press the direct search buttons

on the remote control to select the desired track.

Selected track number

You can also select a track by pressing the or button.

4 Press the MEMORY button to save the track number.

5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.

If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.

6Press the (CD ) button.

The total number in memory will appear.

7Press the / button to start playback.

CD-SW340

To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control while the “MEMORY” indicator is flashing.

Each time the button is pressed, one track will be cleared, beginning with the last track programmed.

To cancel the programmed play mode:		Playback
While in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the program:		disc
If a program has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.		MP3/WMA
When a disc with programmed tracks is ejected, the program is
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or	button.
Notes:
automatically canceled.		or
Even if you press the ON/STAND-BY button to enter the stand-by
		CD
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the program operation, random play is not possible.

21