Sharp SW340 operation manual Timer playback or timer recording, Before setting timer

CD-SW340Timer and sleep operation (Remote control only) (continued)

Advanced Features

32

Timer playback or timer recording

Before setting timer:

1Check that the clock is set to the correct time (refer to page 16). If it is not set, you cannot use the timer function.

2For timer playback: Load a cassette or discs to be played.

For timer recording: Load a cassette for recording in the

cassette compartment.

1Press the ON/STAND-BY button to turn the power on.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the or button to select “ONCE” or “DAILY”, and press the MEMORY button.

Set the clock to the correct time if “ONCE” or “DAILY” does not appear.

4Within 10 seconds, press the or button to

select “ONCE SET” or “DAILY SET”, and press the MEMORY button.

5Press the or button to select “PLAY” or “REC”, and press the MEMORY button.

White Red

The illustrations show the daily timer setting.

6Press the or button to adjust the hour and then press the MEMORY button.

The illustrations show the timer playback setting in the daily timer mode.

7Press the or button to adjust the minutes and then press the MEMORY button.

8Set the time to finish as in steps 6 and 7 above.

9Switch input with the or button, and then press the MEMORY button.

To select the timer playback source: CD, TUNER, TAPE 1 or TAPE 2.

To select the timer recording source: TUNER.

When you select the tuner, select a station by pressing the or button, and then press the MEMORY button.

If a station has not been programmed, “NO PRESET” will be displayed and timer setting will be canceled.