Recording on a cassette tape (continued)
Tape Recording
POWER
ON/
OPEN/
CLOSE
CD
5
4
3
2
1
Recording from a CD or MP3/WMA disc
1Press the
2Press the CD button.
3Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
4 Press the 
button.
Recording will be paused.
5Press one of the 
1 - 
5 buttons to select the desired disc.
6Within 5 seconds, press the 
/ 
button to start recording.
Recording is started from the selected disc. When the playback of the last track is finished or the end of the tape is reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after the tape starts.
To stop recording:
Press the 
(TAPE 
) button.
The disc and tape will stop.
To perform programmed recording:
1Program discs and tracks (see page 21).
2Press the 
button.
3Press the 
/ 
(TAPE 
) button to start recording.
To stop recording:
Press the 
(TAPE 
) button.
The disc and tape will stop.
Recording from the radio
1Tune in to the desired station (see page 26).
2Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3Press the 
button.
Recording will be paused.
4Press the 
/ 
(TAPE 
) button to start recording.
To interrupt recording:
Press the 
button.
To resume recording, press the 
/ 
(TAPE 
) button.
To stop recording:
Press the 
(TAPE 
) button.
Note:
If you hear a whistling noise while recording an AM station, move the AM loop antenna.
30
