Multiple screen connection

Connecting Peripheral Equipment

■Connection when the PN-ZB02 (optional) is attached

The PN-ZB02 expansion board (optional) allows the use of additional connection terminals.

8. PC/AV DVI-D input terminal

•Set DVI of INPUT SELECT on the OPTION menu according to the device to be connected.

•Select the audio input terminal to be used in PC DVI-D or AV DVI-D of AUDIO SELECT on the OPTION menu.

9. PC/AV DVI-D output terminal

•The video of the PC/AV DVI-D input can be output to an external device.

•Outputting HDCP-encrypted video requires an external device which supports HDCP.

•This terminal allows the daisy chain connection of up to 5 monitors.

TIPS

•The length of the signal cables or surrounding environment may affect the image quality.

•The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

•When connecting monitors in a daisy chain set AUTO INPUT CHANGE to OFF.

•Video output is disabled in the following cases: When the input mode is PC HDMI/AV HDMI

When PIP SOURCE of the PIP/PbyP menu is set to PC HDMI or AV HDMI

When the power is turned off

When the monitor is in input signal waiting mode

10. LAN terminal

•You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.

11. External speaker terminals

•Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 10 W.

15. AV component input terminals

•Set BNC of INPUT SELECT on the OPTION menu to AV COMPONENT when using the AV component input terminals.

•Select the audio input terminal to be used in AV COMPONENT of AUDIO SELECT on the OPTION menu.

16. AV video input terminal

•Select the audio input terminal to be used in AV VIDEO of AUDIO SELECT on the OPTION menu.

17. AV S-video input terminal

•Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu.

The monitors can be aligned and used as a large screen.

[Example] Connecting 4 monitors together with RS-232 cables.

RS-232 straight cable		Remote control sensor box
(commercially available)		(Supplied with the PN-ZR01)

	Second monitor	First monitor
	Slave (Expansion unit)	Master (Main unit)
	ID No.: 2	ID No.: 1

	Third monitor	Fourth monitor
	Slave (Expansion unit)	Slave (Expansion unit)
	ID No.: 3	ID No.: 4

RS-232 straight cable (commercially available)

■ Connection with video cable

May vary depending on the system being used.

If using the PC/AV DVI-D terminal, up to 5 monitors can be connected in a daisy chain. (When the PN-ZB02 is attached)

First monitor						Second monitor

PC/AV DVI-D	PC/AV DVI-D	PC/AV DVI-D
input terminal	output terminal	input terminal

1.While pushing the tab, insert the tip of the cable.

2.Release the tab.

TIPS

•Be sure to connect the + and - terminals and the left and right speakers properly.

•Avoid short circuiting the + and - terminals.

12.Audio1 input terminals

13.Audio2 input terminals

•Set the audio input terminal to be used in each input mode in AUDIO SELECT on the OPTION menu.

14. PC RGB input terminals

•Set BNC of INPUT SELECT on the OPTION menu to PC RGB when using the PC RGB input terminals.

•Select the audio input terminal to be used in PC RGB of AUDIO SELECT on the OPTION menu.

Digital signal (DVI) cables

(commercially available)

To PC digital RGB output terminal

shows the signal flow