![](/images/new-backgrounds/1169511/16951115x1.webp)
MOUNTING PRECAUTIONS
•This product is for use indoors.
•Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.
•When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
•A mounting bracket compliant with VESA specifications is required. Do not use any screw holes other than VESA holes for installation.
•When moving the monitor, be sure to hold it with either both handles or the 4 corners on the bottom of the unit. Do not hold the LCD panel. This may cause product damage, failure, or injury.
•Install the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees upward or downward.
•When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor frame.
•Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or mishandling.
•This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C).
•Be careful of high temperatures in the surrounding area. When installing the monitor inside a housing, or if the ambient temperature may be outside of the range of 32ºF
(0ºC) to 104ºF (40ºC), install a fan or take other measures to keep the ambient temperature within the required range.
•Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.
•Adhere to the following when installing the monitor in its vertical orientation. Failing to adhere to the following may cause malfunctions.
-To install in horizontal orientation, rotate the monitor 90 degrees to the right.
-Set the MONITOR on the SETUP menu to PORTRAIT.
(See Operation guide.)
•Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.
•After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•Do not place the monitor on a device which generates heat.
•Be sure to use a
•This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure.
•When attaching an optional part, follow the steps described in the manual for the optional part.
Contents
IMPORTANT INFORMATION | 1 | Binding Cables | 11 |
DEAR SHARP CUSTOMER | 3 | Removing the Handles | 11 |
SAFETY PRECAUTIONS | 3 | Affixing the Protection Covers | 11 |
TIPS AND SAFETY INSTRUCTIONS | 5 | Turning Power On/Off | 12 |
MOUNTING PRECAUTIONS | 6 | Turning on the main power | 12 |
Supplied Components | 7 | Turning power on/off | 12 |
Connecting Peripheral Equipment | 7 | Disabling power on/off operations | 12 |
Multiple screen connection | 8 |
|
|
Preparing the Remote Control Unit | 10 |
|
|
Installing the batteries | 10 |
|
|
Remote control operation range | 10 |
|
|
Connecting the Power Cord | 10 |
|
|
This manual contains instructions regarding connection and installation.
For other instructions, refer to the instruction manuals in the “manual” folder on the included
E6