![](/images/new-backgrounds/1007579/7579213x1.webp)
9Non-accessed EAN and Customer Deletion
X1/Z1 MODE
X2/Z2 MODE
You can delete EANs and customers that had not been accessed for a certain period. You can program a period in the PGM2 mode. As for customer, you can also delete customers with regardless to a
Follow the procedure shown below.
Non-accessed EAN deletion
1.Move the mode key to X1/Z1 position.
2.Select “7 EAN DELETE”.
3.Select “1 READING” to take a report, or “2 DELETE” to delete
4.When you select “2 DELETE”, select you want to delete all the
NOTE It is recommended to take a report first before executing deleting operation.
Non-accessed customer deletion
1.Move the mode key to X2/Z2 position.
2.Select “6 NO ACCESS CUSTOM”.
3.Select “1 READING” to take a report, or “2 DELETE” to delete
4.When you select “2 DELETE”, select you want to delete all the
NOTE It is recommended to take a report first before executing deleting operation.
Customer deletion
1.Move the mode key to X2/Z2 position.
2.Select “7 CUSTOM DELETE”.
3.Specify the range (start/end customer codes) you want to delete.