Sharp UP-700 Direct Key Programming, Direct key, 128, Type Use the selective entry

Direct Key Programming

Use the following procedure to select direct-key programming:

■Direct key

You can assign departments and PLUs directly to the keyboard. In the case of PLUs, you may assign up to 3 levels to be accessed directly on the keyboard. For key no. positions, refer to the illustration shown below.

Procedure

▼

Select a pertinent key no. from the key numbers list.

▼

▼

In the case of selecting “061 DIRECT PLU”

• TYPE (Use the selective entry)

PLU:	Assigns the key as a direct PLU key.
DEPT:	Assigns the key as a direct department key.

NOTE

•You can also select a direct PLU key by pressing the corresponding key when the PLU has been assigned directly on the keyboard instead of selecting the key from the menu.

•When selecting a department, the screen on which a department code is to be entered (the message “DEPT. CODE”) will appear.

•LEVEL1 through 3 (Use the numeric entry)

Enter a PLU code for each level. For example, if you want to use this key as PLU code 1 (level 1) and PLU code 101 (level 2), enter 1 for “LEVEL1” and 101 for “LEVEL2.”

Key numbers

RECEIPT	JOURNAL	25	34	43	52	61	70	79	88	97	106	115	124	133	142
8	16	24	33	42	51	60	69	78	87	96	105	114	123	132	141
7	15	23	32	41	50	59	68	77	86	95	104	113	122	131	140
6	14	22	31	40	49	58	67	76	85	94	103	112	121	130	139
5	13	21	30	39	48	57	66	75	84	93	102	111	120	129	138
4	12	20	29	38	47	56	65	74	83	92	101	110	119	128	137
3	11	19	28	37	46	55	64	73	82	91	100	109	118	127	136
2	10	18	27	36	45	54	63	72	81	90	99	108	117	126	135
1	9	17	26	35	44	53	62	71	80	89	98	107	116	125	134

Departments and PLUs programmable area

NOTE

•You can assign departments and PLUs only the “Departments and PLUs programmable area” shown above.

•You cannot assign a department or a PLU to the position to which a function key has been assigned.

128