Sharp UP-700 instruction manual Or c, VIP sales, Customer management

■VIP sales

This function is used for transaction for the important guest who is free of charge. In this mode, any unit price is not counted.

Procedure	ƒ		c
		[Item entries]
	≈			*Less than the programmed upper limit amount
Example	Key operation			Print

Unit price programmed for PLU1: 1.15 Unit price programmed for PLU2: 15.00

ƒ

1

3 x 2

c

■Customer management

Your POS terminal can provide the customer management function.

To enable the customer management function, enter the customer code assigned to a customer. You can enter the customer code at any point during a transaction.

Normally customer information (name, code and address) are previously set by the programming. However, you can enter a new customer information during transaction. When an undefined customer code is entered, the message, “UNDEFINED CODE” is displayed, then you can enter the customer's name and address, which are saved in the customer file.

For the customer registered, you can allow to defer his/her payment. Take the tentative finalization using the Îkey. The sales amount is accumulated to the charge amount of each customer. When the customer settles his/her charge account take the received-on account entry.

Procedure

*Scan customer code

Ä
ˆ		Customer code		e				Sales registration
**
				(max.13 digits)
	Name entry		e or c			Address entry	e or c
(max.16 characters)					(max.40 characters)

***

*: Scanning the customer code on a Customer Card provided to the customer, or EAN-13 format bar code. Additionally the customer code can be read by the optional magnet card reader.

**: When a code entered for the customer entry does not exist in the customer file, "UNDEFINED CODE" is displayed for a moment with beep sounds. Then the NAME entry window is displayed to prompt to operator to enter a customer's name.

***: The ADDRESS entry window is displayed.

67