Auto/Manual Focus
Auto Focus
The auto focus function is designed to focus on most types of subjects. In Auto Focus mode, the VIEWCAM automatically focuses on what- ever is in the center of the scene. Always keep the subject in the center of the screen.
Notes:
•If no subject is in the center of the screen, the focus area will expand and the subject nearest the center will be focused on.
•If no subject is displayed on the screen, the VIEWCAM will automatically zoom out until a subject comes into the frame.
Manual Focus
1 In Recording Standby mode, press the MENU button until
appears.
|
|
|
|
|
| WH I T E |
| E XPO |
|
|
|
|
|
|
| ||
|
| F OCUS |
|
|
| BA L . |
| SUR E |
|
|
|
2 Press the FOCUS button (D) to set the VIEWCAM to Manual Focus mode (“MAN’L FOCUS”).
F OCU S
|
| MAN’ L |
|
|
| WH I T E |
| EXPO |
F |
| F OCU S |
| N |
| BA L. |
| SURE |
|
|
|
|
The Auto Focus may not be able to focus on the subject in the situations shown below. In such situations, set the VIEWCAM to Manual Focus mode and focus manually.
Subject is too dark. | Lack of contrast, e.g. snow | |
scene. | ||
| ||
Background is too bright. | ||
Subject has | Subject is being shot through | |
horizontal stripes. | a dirty or wet window. | |
Light reflects off the subject. | Two subjects at different distances | |
overlap in the same scene. | ||
| ||
Subject has fine, repeated | Subjects at different distances | |
patterns. | appear in the center of the scene | |
| at the same time. |
3 Push the Power Zoom control to frame the subject as you desire.
4 Press the F (C) or N (B) button to focus on the subject.
|
| MAN’ L |
|
|
| WH I T E |
| EXPO | ||
F |
| F OCU S |
| N |
| BA L. |
| SURE | ||
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To cancel Manual Focus mode
Perform step 1 above, and press the D button to set the VIEWCAM to Auto Focus mode (“FOCUS”).
Notes:
•The VIEWCAM may not be able to focus correctly if the subject is within approximately 5 feet (1.5 m). Set the zoom control to wide angle, and then try refocusing.
•If the lens is dirty or fogged, the VIEWCAM may not be able to correctly focus.
•The Manual Focus mode will be canceled if the power source is interrupted.
Advanced Features
44
