Editing, Cutting Unwanted Sequences | Sharp VL-AH130U specs

Advanced Features

Editing

Video editing lets you refine your videos by removing unwanted sequences from your tape, or transposing one sequence with another. This VIEWCAM lets you monitor the source pro- gram on the built-in LCD monitor without having to connect it to an external TV or video monitor.

Connect the VIEWCAM to a VCR with the sup- plied audio/video cable, as shown.

4 Press the Pause/Still button on the VCR to pause recording when the source tape reaches the beginning of the sequence to be cut.

5 Press the Pause/Still or Record button on the VCR to resume recording when the source tape reaches the end of the sequence to be cut.

To stop editing

Press the Stop buttons on the VIEWCAM and the VCR.

Advanced Features

		Yellow: To VIDEO IN jack
Recording		White: To AUDIO IN (L) jack

Audio/video cable (supplied)

Playback

To AUDIO/VIDEO jack

Cutting Unwanted Sequences

1 Play back the tape to be edited, and locate the beginning and end of the sequence you wish to cut. Write down the tape counter readings at the beginning and end of that sequence (see page 37). Then rewind the tape to the beginning of the portion that you wish to keep.

2 Load a video cassette into the recording VCR.

3 Set the Power switch on the VIEWCAM to VCR. Press the PLAY button (D) on the VIEWCAM and the Record button on the VCR at the same time.

Notes:

•Some of the transitions between edited sequences may be slightly off.

•There may be picture noise during video search or still picture playback. This does not imply a defect in the VIEWCAM.

Setting Edit Mode

Picture quality inevitably decreases when dubbing from the VIEWCAM to a VCR. To minimize the quality reduction, set the VIEWCAM to Edit mode.

1 Set the Power switch to VCR, then press

the MENU button untilappears.

		MENU
		ED I T	OF F
		REMOT E	AUTO
		REMOT E	ON
		3 3	P I C -
			P I C -
		S E T TURE
2 Press the	or	button (Q) to select
“EDIT”, then press the SET button (B)
(W) to select “ON”.
		MENU
		ED I T	ON
	S E T		AUTO
	S E T	REMOT E	ON
		REMOT E	ON
		S E T	P I C -
		S E T	TURE

Notes:

•The EDIT mode does not function when the VIEWCAM is recording.

•After you finish editing, set the EDIT menu item back to “OFF”.

49

Image 58

Sharp VL-AH130U operation manual Editing, Cutting Unwanted Sequences, Setting Edit Mode, To stop editing

Contents

See page 54 for use of Demo mode VL-AH130U Thank you for purchasing this Viewcam from Sharp Applies to the supplied AC adapter Information Iii Should never be blocked by placingPage Do not aim the lens at the sun Avoid shocks and dropping Recording Format LCD Monitor Screen Vii Viii Tripod adapter For 180 recording Contents References Useful FeaturesAdvanced Features Gamma Brightness Compensation Operation Summary When the cassette compartment door is openPart Names Cassette compartment door p Rear view Remote sensor p Quick Reference Index Video cassette is defective and should be Removing the Battery Pack Battery PackInserting the Battery Pack Inserting and Removing Continuous Charging the Battery PackTime Powering the Viewcam from an AC Outlet Removing a Cassette Inserting and Removing a CassetteInserting a Cassette Perform above, then take out the cassette Installing the Lithium Memory Battery Removing the Lithium Battery Selecting the Language for the On-screen Display Setting the LanguageChanging the Language Camera Mode VCR Mode French On-screen Displays Spanish On-screen Displays Press the SET button B Setting the Date and TimeChanging to the 24-hour Time Mode 0 0 Attaching and Removing the Lens Cap Using the Hand Strap and the Lens CapAttaching the Shoulder Strap LCD screen side To Pause Recording Easy Camera Recording with Full Auto ModeTo Turn the Power Off Maximum Continuous Recording and Actual Recording Times Tips on Recording Positions ZoomingBasic Operations Camera Recording Approx. remaining On-screen Recording time Indicator Remaining Battery Power DisplayRemaining Recording Time Display To Stop Playback Volume ControlPlayback Auto Tape Rewind This Viewcam does not have an S-video socket Watching the Playback on aPlayback Slow Video SearchStill Basic Operations Playback Menu button Useful FeaturesOperations of the On-screen Controls Display button Button C or D to PressSelect the desired menu item Recording the Date and Time Fade In and Fade Out Selecting Fade ModeUsing Fade Mode Type of Fade Modes Quick Review To cancel Fade modeTo use fade out only Quick Return Edit Search QU I CK To obtain a brighter picture To cancel Gamma Brightness CompensationGamma Brightness Compensation Press the Gama EFF. button a again To cancel the gain-up function Gain-up Cat’s Eye Removing the Lens Hood Wide ScreenMacro Shots To return to normal picture More Information on Self Recording Self RecordingNormal Self Recording To pause recording, press the REC Stop button B Self-recording Message Setting the Viewcam to Full Auto Mode Blue Program Search FeaturesUseful To reset the counter to zero Tape Counter FeatureUsing the Counter To turn off the tape counter During playback, press the Menu Button until appears Using the Counter MemoryPress the Play button D to view the desired scene Turning On the Remote Control Mode Using the Remote ControlInstalling the Batteries in the Remote Control Operating the Remote Control Digital Picture Effects To cancel the digital picture effectAdvanced Features Type of Digital Picture Effects Scene Menu Program AE Type of Scene SettingsTo cancel the scene setting Select Scene Menu in above Superimposing a Title Press the or ß button Q to select Changing the Preset TitlesPress the Reset button to display the title input screen Top of the screen and the cursor will Auto Focus To cancel Manual Focus modeAuto/Manual Focus Manual Focus White Balance Lock To cancel White Balance LockPress the White BAL. button. White BAL. returns to blue Manual Exposure To cancel Manual Exposure modePerform steps 1 and 2 above, then press the Auto button B Press the Menu button until Camera mode or VCR mode appears Picture/Backlight AdjustmentsType of Backlight Modes Turning Off the LCD Monitor Backlight To cancel Gamma PlaybackGamma Playback Press the Gama EFF. button again. Gamma disappears Cutting Unwanted Sequences Setting Edit ModeEditing To stop editing Lighting Useful InformationHints for Better Shooting Tips on Good Lighting Dew Formation Dirty Video Heads Battery Pack Replacing the Fluorescent Lamp References Video Cassette Tapes CleaningUsing Your Viewcam Abroad AC Adapter Canceling Demo Mode Demonstration ModeWatching the Demonstration Before Requesting Service Symptom Possible cause Suggested solution VCR Battery Pack BT-H22 SpecificationsService Information For the U.S AC Adapter UADP-0312TAZZ Inserció n de la batería Inserció n y extracció n de laBatería Extracció n de la batería Selecció n de idioma para la visualizació n en pantalla Carga de la bateríaGuía de operació n rá pida en españ ol Extracció n de un videocasete Inserció n y extracció n de un videocaseteInserció n de un videocasete Realice el paso 1 de arriba y luego saque el videocasete Pulse el botón REC START/STOP para iniciar la grabación Para hacer una pausa en la grabació nPara desconectar la alimentació n Batería Para detener la reproducció n Control de volumenReproducció n Rebobinado automá tico de la cinta Sharp Plaza, Mahwah, New Jersey Valid for warranty service in the U.S. onlyWhere to Obtain Service What to do to Obtain Service Osaka, Japan