Sharp VL-Z500E operation manual SD\ Memory Card and MultiMediaCard, Removable Storage Care

SD\ Memory Card and MultiMediaCard\

SD (Secure Digital) Memory Cards and MultiMediaCards are small, handy and flexible storage media used in a variety of mobile applications. They are one of the smallest memory solutions available on the market. This camcorder uses either an SD Memory Card or a MultiMediaCard. It cannot use a SmartMedia/card or Memory Stickb.

SD/ Memory Card MultiMediaCard/

Precautions

•Be sure to insert the card in the correct direction. Do not try to force the card in.

•Store the card in its antistatic plastic case when not in use.

•Do not disassemble or modify the card.

•Do not strike, bend or drop the card.

•Do not allow the card to become wet.

•Do not peel off the card label.

•Do not attach other labels or stickers to the card.

•Do not expose to extreme heat sources (e.g. sunlight, heating appliances).

•Do not store in a highly humid or dusty place.

•Do not store in a place exposed to corrosive gas.

•Do not use in a place exposed to strong electromagnetism.

SmartMedia\ card Memory Stickb media

•An SD Memory Card has more advanced features than a MultiMediaCard, including cryptographic security for copyrighted data and a selectable mechanical write- protect switch.

•The card slot on this camcorder is compat- ible with an SD Memory Card or MultiMediaCard.

•An SD Memory Card and a MultiMediaCard are cross-compatible. Data stored on one can be easily transferred to the other.

Note:

•This camcorder is verified to work properly with the following card memory types.

—SD Memory Card: 128 MB or less

—MultiMediaCard: 64 MB or less

Removable Storage Care

Below are some precautions to ensure a long life and perfect performance from your SD Memory Card (SDMC) or MultiMediaCard (MMC). Information specific to one card is attached with the card’s acronym (either SDMC or MMC).

Protecting your images

•Select the write-protect switch on the exterior card casing to protect your images. (SDMC)

•Do not power off any devices while transfer- ring data, as this may destroy the data.

•Back up your image data often to a hard disk or other permanent storage media.

•Be aware that formatting will erase all image data stored on the card.

Note:

•Sharp Corporation cannot be held liable for data that is lost through improper handling of the storage media.

Cleaning

•Be careful not to allow dirt and finger grime buildup around the card contacts.

•Be careful about static electricity, which can suddenly erase data.

•If you notice dirt or static electricity, clean the card with a soft, dry cloth.

Condensation

•Be careful about condensation forming on the card surface, which can cause malfunction.

•If you notice beads of water on the card, allow it to evaporate and dry naturally.

Appendix

101