Sharp VL-Z500E operation manual Deleting All Stored Images, Delete ALL? indicator appears

Deleting All Stored Images

You can delete all stored images on a card in one operation.

Notes:

•Deleted images cannot be restored. Check whether or not you want the images before performing the procedure below.

•If you want to keep some images on the card, first delete-protect them (see page 83), and then perform the procedure below.

1 In Card Playback mode, press the DISPLAY/MODE SET button until the mode screen appears.

2 Press l or m on the Operation button to select “DELETE ALL”, then press the centre of the Operation button.

• The DELETE ALL? indicator appears.

3 Press l or m to select “YES”, then press the centre of the Operation button.

• To cancel the setting, select “NO”.

4 Press the DISPLAY/MODE SET button to finish the setting.

Notes:

•The protected images cannot be deleted. Cancel the protection setting to delete the image (see page 83).

•If a print order is assigned to delete- protected images and you perform the procedure above, the print order will cancel (the protection setting will not cancel).

•It may take several seconds to delete all images from the card.

•Do not turn the power off while deleting images.

F U L L MULT I

P I C . E F F E C T

D E L E T E O N E

D E L E T E A L L E X E C U T E

1		2	3
4		5	6
D E L E T E A L L ?			1 0 0 - 0 0 0 1
N O			NO RMA L
Y E S	S E T
S E L E C T

DELETE ALL? indicator

Digital Still Camera Features

85