Sharp VL-Z5E operation manual Powering the Camcorder from an AC Outlet

Powering the Camcorder from an AC Outlet

You can also power the camcorder from a power outlet by using the supplied AC adapter.

Note:

•The supplied AC adapter is specially designed for use with this camcorder, and should not be used as a power supply for other camcorders.

1 Make sure that the Power switch is set to OFF.

2 Open the DC IN jack cover.

DC IN jack cover

3 Connect the supplied power cord to the AC power socket on the AC adapter, and insert the AC plug into a power outlet.

AC power socket

To power outlet

4 Insert the DC plug into the DC IN jack of the camcorder.

POWER/CHARGE (RED) indicator

DC IN jack

DC plug

5 Hold down the Lock button and set the Power switch to v or w.

•The POWER/CHARGE (RED) indicator lights up green.

Notes:

•BEFORE REMOVING THE DC PLUG, ALWAYS STOP RECORDING OR PLAY- BACK AND TURN THE POWER OFF. Removing the DC plug while shooting or during playback may damage the tape by causing it to wrap around the video head drum or destroy the card, rendering it unreadable and unwritable.

•Disconnect the AC adapter from the camcorder if you will not use the camcorder for a long period of time.

Preparation

9