Sharp VL-Z5E operation manual Edit Search, Still Recording on Tape, Press the Start/Stop button

Useful Features Camera Recording

Edit Search

Available mode:

Tape Camera

The edit search function lets you search, without switching from Tape Camera mode to Tape Playback mode, for the point on the tape where you wish to start recording next.

Still Recording on Tape

Available mode:

Tape Camera

You can record continuous still images of subjects.

1 Set the camcorder to Tape Camera mode.

2 In Recording Standby mode, press the PHOTO button fully.

•A still image of the subject is displayed.

Useful Features

Operation button

1 Set the camcorder to Tape Camera mode.

2 In Recording Standby mode, press and hold down j (reverse edit search) or k (forward edit search) on the Operation button.

3 When you find the point where you want to begin recording, release the button.

Notes:

•The sound is off during search.

•Forward edit search is performed at the same speed as normal playback, and reverse edit search at 6.5 times the normal playback.

•You may experience picture noise during reverse edit search.

3 Press the Start/Stop button.

• The still image of the subject will be recorded.

To pause recording

Press the Start/Stop button.

To cancel the still image

Press the PHOTO button fully.

Notes:

•Still Recording can also be used during recording by pressing the PHOTO button fully.

•The picture quality in Still Recording function will be slightly lower than normal pictures.

38