Sharp XG-MB67X 31

When connecting to the LAN terminal using a LAN cable

Hub

Computer

LAN cable (Category 5 type, commercially available)

Note

TX/RX LED (yellow) Illuminates when transmit- ting/receiving data.

LINK LED (green)

Illuminates when linked.

* To ensure safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line.

To LAN terminal

•When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially available).

•When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available).

Connecting the Power Cord
Plug the supplied power cord into the
AC socket on the rear of the projector.	Supplied	Power cord
Then plug into AC outlet.	Supplied
	accessory
	accessory

AC socket

To AC outlet

Connections

Contents

MODEL Model No.: Serial No.: Page Page ENGLISH PRODUCT DISPOSAL Caution Concerning Lamp Replacement Info Note PP. 59 and Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Page Supplied accessories Projector 29 28 40 Rear View Page Caution Setup and Projection 1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on 4.Adjust the projected image with the Setup Guide 5.Turn the computer on 6.Select the INPUT mode 7. Correct trapezoidal distortion 8. Turn the Power off Setting up the Projector Standard Setup (Front Projection) Example of standard setup Side View Ceiling-mountSetup Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Screen Size and Projection Distance INPUT Terminals and Connectable Main Equipment Connections Page Page Page Page Page Page Turning the Projector on Turning the Power off (Put- ting the Projector into Standby Mode) About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Correcting Trapezoidal Distortion BasicOperation Resize Mode Page Auto Sync (Auto Sync Adjustment) Displaying and Setting the Break Timer Freezing a Moving Image Selecting the Picture Mode Page Page Page Menu Selections (Adjustments) To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Progressive 5Lamp Setting 1Setting the Resize Mode 3Keystone Correction 2Adjusting the Image Position 4Setting the On-screenDisplay 7Reversing/Inverting Projected Images 5Selecting the Background Image 6Selecting the Setup Guide 8Selecting the On-screenDisplay Language 1Auto Search Function 2Auto Sync (Auto Sync Adjustment) 3Auto Power Off Function 4Setting the Confirmation Sound (System Sound) 8System Lock Function 7Fan Mode Setting 9Checking the Lamp Life Status Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) Setting up the Projector Network Environment (“Network” menu) 1Setting a Password 2DHCP Client Setting 3TCP/IP Setting 4Confirming the Projector Information Utilizing the “Help” menu func tions Page Appendix Page Lamp Caution Concerning the Lamp Replacing the Lamp Caution Warning Resetting the Lamp Timer Page Page Page Page Page Units: inches (mm)