Sharp XG-MB67X Turning the Projector on

Turning the Projector On/Off

Turning the Projector on

Note that the connections to external equipment and power outlet should be done before performing the operations written be- low. (See pages 23 to 27.)

Remove the lens cap and press SSTANDBY/ON on the projector or fON on the remote control.

•When System Lock is set, the keycode input box appears. To cancel the keycode setting, input the keycode that you have already set. See page 47 for details.

Info

•English is the factory default language. If you want to change the on-screen display to an- other language, change the language accord- ing to the procedure on page 45.

Lamp indicator

STANDBY/ON button

Note

• About the Lamp Indicator

The lamp indicator illuminates to indicate the status of the lamp.

Green: The lamp is on.

Blinking in green:The lamp is warming up or shutting down.

Red:The lamp is shut down abnormally or the lamp should be replaced.

• When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illumi- nated. This is normal operation as the lamp’s

ON button

control circuitry is stabilising the lamp output characteristics. It should not be regarded as faulty operation.

• If the projector is put into standby mode and immediately turned on again, the lamp may take some time to start projection.

28

Contents

MODEL Model No.: Serial No.: Page Page ENGLISH PRODUCT DISPOSAL Caution Concerning Lamp Replacement Info Note PP. 59 and Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Page Supplied accessories Projector 29 28 40 Rear View Page Caution Setup and Projection 1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on 4.Adjust the projected image with the Setup Guide 5.Turn the computer on 6.Select the INPUT mode 7. Correct trapezoidal distortion 8. Turn the Power off Setting up the Projector Standard Setup (Front Projection) Example of standard setup Side View Ceiling-mountSetup Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Screen Size and Projection Distance INPUT Terminals and Connectable Main Equipment Connections Page Page Page Page Page Page Turning the Projector on Turning the Power off (Put- ting the Projector into Standby Mode) About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Correcting Trapezoidal Distortion BasicOperation Resize Mode Page Auto Sync (Auto Sync Adjustment) Displaying and Setting the Break Timer Freezing a Moving Image Selecting the Picture Mode Page Page Page Menu Selections (Adjustments) To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Progressive 5Lamp Setting 1Setting the Resize Mode 3Keystone Correction 2Adjusting the Image Position 4Setting the On-screenDisplay 7Reversing/Inverting Projected Images 5Selecting the Background Image 6Selecting the Setup Guide 8Selecting the On-screenDisplay Language 1Auto Search Function 2Auto Sync (Auto Sync Adjustment) 3Auto Power Off Function 4Setting the Confirmation Sound (System Sound) 8System Lock Function 7Fan Mode Setting 9Checking the Lamp Life Status Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) Setting up the Projector Network Environment (“Network” menu) 1Setting a Password 2DHCP Client Setting 3TCP/IP Setting 4Confirming the Projector Information Utilizing the “Help” menu func tions Page Appendix Page Lamp Caution Concerning the Lamp Replacing the Lamp Caution Warning Resetting the Lamp Timer Page Page Page Page Page Units: inches (mm)