Sharp XG-MB67X 43

“Help” menu

Pict.

SCR

PRJ

Net.

Help

There is no picture or audio

Vertical stripes or flickering image appear

Data image is not centered

Color is faded or poor

Picture is dark

The image is distorted

Reset all adjustments to default settings

SEL.

ENTER

END

The items you can set with the “Help” menu

“Help” menu n Page 51

•Vertical stripes or flickering image appear Auto Sync

Adjust vertical noise Adjust horizontal noise

•Data image is not centered

Auto Sync

H-Pos

V-Pos

•Color is faded or poor INPUT 1 or INPUT 2

Signal type: Auto/RGB/Component INPUT 3 or INPUT 4

Video System: A u t o / P A L / S E C A M /

NTSC3.58/NTSC4.43/PAL-

M/PAL-N/PAL-60

*The selectable items vary depending on the in- put signal and the selected input mode.

Features

Useful

Contents

MODEL Model No.: Serial No.: Page Page ENGLISH PRODUCT DISPOSAL Caution Concerning Lamp Replacement Info Note PP. 59 and Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Page Supplied accessories Projector 29 28 40 Rear View Page Caution Setup and Projection 1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on 4.Adjust the projected image with the Setup Guide 5.Turn the computer on 6.Select the INPUT mode 7. Correct trapezoidal distortion 8. Turn the Power off Setting up the Projector Standard Setup (Front Projection) Example of standard setup Side View Ceiling-mountSetup Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Screen Size and Projection Distance INPUT Terminals and Connectable Main Equipment Connections Page Page Page Page Page Page Turning the Projector on Turning the Power off (Put- ting the Projector into Standby Mode) About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Correcting Trapezoidal Distortion BasicOperation Resize Mode Page Auto Sync (Auto Sync Adjustment) Displaying and Setting the Break Timer Freezing a Moving Image Selecting the Picture Mode Page Page Page Menu Selections (Adjustments) To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Progressive 5Lamp Setting 1Setting the Resize Mode 3Keystone Correction 2Adjusting the Image Position 4Setting the On-screenDisplay 7Reversing/Inverting Projected Images 5Selecting the Background Image 6Selecting the Setup Guide 8Selecting the On-screenDisplay Language 1Auto Search Function 2Auto Sync (Auto Sync Adjustment) 3Auto Power Off Function 4Setting the Confirmation Sound (System Sound) 8System Lock Function 7Fan Mode Setting 9Checking the Lamp Life Status Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) Setting up the Projector Network Environment (“Network” menu) 1Setting a Password 2DHCP Client Setting 3TCP/IP Setting 4Confirming the Projector Information Utilizing the “Help” menu func tions Page Appendix Page Lamp Caution Concerning the Lamp Replacing the Lamp Caution Warning Resetting the Lamp Timer Page Page Page Page Page Units: inches (mm)