Specifications

Product type

Projector

 

Model

XG-MB67X

 

Video system

NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/

 

DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50

Display method

Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments

DMD panel

Panel size: 0.55" (14 mm), 1chip XGA DMD

 

No. of dots: 786,432 dots (1,024 [H] ⋅ 768 [V])

Lens

1–1.15 ⋅ zoom lens, F2.4–2.6, f = 18.7–21.5 mm

Projection lamp

300 W DC lamp

 

Component input signal

15-pin mini D-sub connector

(INPUT1/2)

Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB: 0.7 Vp-p, 75 Ω terminated

 

PR: 0.7 Vp-p, 75 Ω terminated

Horizontal resolution

600 TV lines (DTV720P)

Computer RGB input

15-pin mini D-sub connector

(INPUT 1/2)/output

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated

(OUTPUT) signal

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)

 

VERTICAL SYNC. SIGNAL: Same as above

S-video input signal

4-pin mini DIN connector

(INPUT 3)

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

 

C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Video input signal

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω

(INPUT 4)

terminated

 

Vertical frequency

45–85 Hz

 

Horizontal frequency

15–70 kHz

 

Pixel clock

12–108 MHz

 

RS-232C terminal

9-pin mini DIN connector

LAN terminal

8-pin RJ-45 modular connector

Audio input signal

ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 kΩ (stereo)

Audio output signal

ø3.5 mm minijack: 0.5 Vrms, less than 2.2 kΩ

(AUDIO OUTPUT 1-4)

4 cm ⋅ 2.85 cm oval ⋅ 1

Speaker system

Rated voltage

AC 110–240 V

 

Input current

3.6 A

 

Rated frequency

50/60 Hz

 

Power consumption

385 W (Lamp Setting

“Bright”)/

 

308 W (Lamp Setting

“Eco + Quiet”) with AC 110 V

 

367 W (Lamp Setting

“Bright”)/

 

300 W (Lamp Setting

“Eco + Quiet”) with AC 240 V

Power consumption (standby) 9.3 W (AC 110 V) – 10.0 W (AC 240 V)

Heat dissipation

1,450 BTU/hour (Lamp Setting “Bright”)/

 

1,160 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 110 V

 

1,380 BTU/hour (Lamp Setting “Bright”)/

 

1,130 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V

Operating temperature

41°F to 95°F (+5°C to +35°C)

Storage temperature

–4°F to 140°F (–20°C to +60°C)

Cabinet

Plastic

 

I/R carrier frequency

38 kHz

 

Dimensions (approx.)

12 13/32" ⋅ 4 19/64" ⋅ 11 1/32" (315 (W) ⋅ 109 (H) ⋅ 280 (D) mm) (main body only)

 

12 13/32" ⋅ 4 47/64" ⋅ 11 37/64" (315 (W) ⋅ 120 (H) ⋅ 294 (D) mm) (including adjust-

 

ment foot and projecting parts)

Weight (approx.)

8.6 lbs. (3.9 kg)

 

Replacement parts

Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe,

 

except U.K., Power cord for U.K. and Singapore, Power cord for Australia, New

 

Zealand and Oceania, RGB cable, DIN-D-sub RS-232C adaptor, Operation

 

manual (Printed and CD-ROM)

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

62