Setting up the Projector Network Environment (“Network” menu) (Continued)
2DHCP Client Setting
Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.
Selectable items | Description |
|
|
On | Obtains configuration |
| parameters for TCP/IP network |
| automatically. |
|
|
Off | Sets the TCP/IP manually. |
|
|
Select “On” for “DHCP Client”, then press hENTER. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.
If the DHCP server is not available, “Could not obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the item 3.)
3TCP/IP Setting
Set the TCP/IP manually.
Selectable items | Description |
|
|
IP Address | Factory default setting: |
| 192.168.150.002 |
| Enter an IP address appropri- |
| ate for the network. |
Subnet Mask | Factory default setting: |
| 255.255.255.000 |
| Set the subnet mask to the |
| same as that of the computer |
| and equipment on the |
| network. |
Gateway | Factory default setting: 000. |
| 000. 000. 000 |
| * When not in use, set to “000. |
| 000. 000. 000”. |
|
|
Note
•Confirm the existing network’s segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other net- work equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don’t have to change the projector IP address.
•For details about each setting, consult your network administrator.
1
2
3
Select “Off” for “DHCP Client”, then press hENTER.
Select “TCP/IP”, then press hENTER.
Enter “IP Address” using P, R, Q and O, then press hENTER.
|
|
|
|
|
|
| Network |
|
|
|
|
|
| ||||
| Setting the TCP/IP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| IP Address | 1 | 9 | 2 | . | 1 | 6 | 8 | . 1 | 5 | 0 | . 0 | 0 | 2 |
| ||
| Subnet Mask | 2 | 5 | 5 | . | 2 | 5 | 5 | . | 2 | 5 | 5 | . | 0 | 0 | 0 |
|
| Gateway | 0 | 0 | 0 | . | 0 | 0 | 0 | . | 0 | 0 | 0 | . | 0 | 0 | 0 |
|
4Confirming the Projector Information
You can confirm the MAC address and projector name.
Displayed items | Description |
|
|
MAC Address | The MAC address of the |
| projector is displayed. |
|
|
Projector | The projector name is |
| displayed. (Factory preset : |
| |
|
|
4
5
Enter “Subnet Mask” using P, R,
Qand O, then press hENTER.
Enter “Gateway” using P, R, Qand O, then press hENTER.
Note
•For information on how to change the projec- tor name, see “SETUP MANUAL” contained in the supplied
50