Sharp XG-MB67X Info, Note, PP. 59 and, Introduction

How to Read this Operation Manual

•In this operation manual, the illustration and the screen display are simplified for explanation, and may differ slightly from the actual display.

Introduction

Using the Menu Screen

ENTER button

Adjustment buttons (P/R/O/Q)

MENU/HELP button

Adjustment buttons

(P/R/O/Q)

MENU/HELP button

ENTER button

RETURN button

• Press lRETURN to return to the previous screen when the menu is displayed.

Menu Selections (Adjustments)

Example: Adjusting “Bright”.

•This operation can also be performed by using the buttons on the projector.

Buttons used in this operation

Button used in

1 Press BMENU.

•The “Picture” menu screen for the se- lected input mode is displayed.

2 Press Qor Oand select “Picture” to adjust.

Example: “Picture” screen menu for INPUT 1 (RGB) mode

Menu item


		Picture		SCR	PRJ	Net.			Help

		Picture Mode				Standard
		Contrast			0
		Bright			0
		Bright			0
		Red			0
		Red			0
		Blue			0
		Blue			0
		CLR Temp			8 5 0 0 K
		Bright Boost			1
		Lamp Setting				Bright
		Reset

		SEL./ADJ.			ENTER			END

this step

On-screen display

40

Info ........Indicates safeguards for using the projector.

Note .........Indicates additional information for setting up and operating the

projector.

For Future Reference

		Maintenance			Troubleshooting					Index
		P. 52				PP. 59 and 60				P. 64

3

Contents

MODEL Model No.: Serial No.: Page Page ENGLISH PRODUCT DISPOSAL Caution Concerning Lamp Replacement Info Note PP. 59 and Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Page Supplied accessories Projector 29 28 40 Rear View Page Caution Setup and Projection 1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on 4.Adjust the projected image with the Setup Guide 5.Turn the computer on 6.Select the INPUT mode 7. Correct trapezoidal distortion 8. Turn the Power off Setting up the Projector Standard Setup (Front Projection) Example of standard setup Side View Ceiling-mountSetup Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Screen Size and Projection Distance INPUT Terminals and Connectable Main Equipment Connections Page Page Page Page Page Page Turning the Projector on Turning the Power off (Put- ting the Projector into Standby Mode) About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Correcting Trapezoidal Distortion BasicOperation Resize Mode Page Auto Sync (Auto Sync Adjustment) Displaying and Setting the Break Timer Freezing a Moving Image Selecting the Picture Mode Page Page Page Menu Selections (Adjustments) To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Progressive 5Lamp Setting 1Setting the Resize Mode 3Keystone Correction 2Adjusting the Image Position 4Setting the On-screenDisplay 7Reversing/Inverting Projected Images 5Selecting the Background Image 6Selecting the Setup Guide 8Selecting the On-screenDisplay Language 1Auto Search Function 2Auto Sync (Auto Sync Adjustment) 3Auto Power Off Function 4Setting the Confirmation Sound (System Sound) 8System Lock Function 7Fan Mode Setting 9Checking the Lamp Life Status Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) Setting up the Projector Network Environment (“Network” menu) 1Setting a Password 2DHCP Client Setting 3TCP/IP Setting 4Confirming the Projector Information Utilizing the “Help” menu func tions Page Appendix Page Lamp Caution Concerning the Lamp Replacing the Lamp Caution Warning Resetting the Lamp Timer Page Page Page Page Page Units: inches (mm)