XL-3000V

System Connections

 

 

FM aerial

 

Right speaker

AM loop aerial

Left speaker

MD recorder

 

 

 

 

 

not supplied

 

 

 

TV

Right speaker

Left speaker

 

 

 

 

To a wall socket

 

Black wire

 

 

 

with white dots

 

 

 

Black wire

 

 

System Connections (continued)

Placing the speaker system

There is no distinction between the right and the left speakers.

Left speaker

Right speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles.

Notes:

The speakers are magnetically shielded.

Therefore, they do not affect the display even you use them near the TV. However, some colour variation may occur, depending on the type of TV used.

If colour variation occurs...

Turn off the TV (from the power switch). After 15 - 30 minutes, turn the TV on again.

If the colour variation is still present...

Move the speakers further away from the TV.

If any kind of magnet or an electromagnet is placed too close to the TV and the system, irregular colours may appear on the TV screen.

TV/monitor connection

If the TV/monitor has a video input, connect it to VIDEO OUT socket on the rear of the unit.

TV

To video input socket

Video cable

Note:

If the TV/monitor does not have a video input, the VIDEO OUT socket on the unit should be connected to a VCR with a video input, which in turn should be connected to the TV/monitor through the TV ANTENNA/CABLE input. (Be sure to turn on the VCR, and set the VCR's input mode to "auxiliary".)

– 7 –

Page 7
Image 7
Sharp XL-3000V service manual System Connections