Sharp XL-35H For Use, Aerial connection, Speaker connection, Connecting the AC power lead

!Aerial connection

Connect the FM/AM loop aerial to the ANTENNA socket.

Position the FM aerial wire and rotate the AM loop aerial for opti- mum reception. Place the AM loop aerial on a shelf, or attach it to a stand or a wall.

Notes:

"Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

"Do not connect the attached FM aerial to an external FM aerial. Otherwise, trouble may occur.

Installing the AM loop aerial:
< Assembling >	< Attaching to the wall >

Wall Screws (not supplied)

!Speaker connection

Connect the wire with the white line to the minus (-) terminal and the black wire to the plus (+) terminal.

Caution:

"Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.

"Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.

"Do not let the bare speaker wires touch

each other.

Incorrect

Placing the speaker system:

There is no distinction between the right and the left speakers.

Note:

The speaker grilles are not removable.

!Connecting the AC power lead

After checking all the connections, connect the AC power lead to the AC power input socket, then plug the AC power lead of this unit into the wall socket.

Notes:

"Unplug the unit if it is not to be used for a prolonged period of time.

"Never use a power lead other than the one supplied. Otherwise, a malfunction or an accident may occur.

!To turn the power on

Press the ON/STAND-BY button to turn the power on.

To set the unit to the stand-by mode:

Press the ON/STAND-BY button again.

XL-35H

ENGLISH

for Use
Preparation
	1
	2

3 4

5 6

7

8

E-6

02/9/11 XL35H_H_E1.fm