Sharp XL-35H operation manual Features, E-20, Sleep operation, To cancel the timer playback, 3 5

6Within 1 minute, press the PRESET ( or ) button to spec- ify the minutes to start, then press the MEMORY button.

!The timer playback starting time, function, and volume will be displayed, and then the unit will enter the stand-by mode au- tomatically.

!"" will appear and the current time will be displayed.

To cancel the timer playback:

Press the ON/STAND-BY button to turn the power on.

7When the preset time is reached, playback will start.

The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer stand- by mode.

8The unit will enter the stand-by mode one hour after the timer playback starts. However, when CD or tape playback time is one hour or less, it will enter the stand-by mode af- ter completing playback.

To reset or change the timer setting:

Perform "Timer playback" from the beginning.

Note:

When performing timer playback using another unit connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this time, only this unit will be turned on or enter the power stand-by mode automatically. It will enter the power stand-by mode 1 hour after the timer playback starts. (Another unit will not be turned on or off.

"Sleep operation

1Play back the desired sound source.

2Press the SLEEP button.

To change the sleep time:

Press the SLEEP button repeatedly to select the desired sleep time. The time will decrease as follows.

The amount of sleep time can also be changed whilst in the sleep mode.

3:00 2:00 1:30 1:00

OFF 5 10 15 30

3Your system will enter the power stand-by mode automat- ically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep op- eration finishes.

To cancel the sleep operation:

Press the ON/STAND-BY button whilst "SLEEP" is indicated.

To cancel the sleep operation without setting the system to the stand-by mode, press the SLEEP button until "OFF" appears on the display.

To confirm the remaining sleep time:

Press the SLEEP button once whilst the sleep timer is set. The remaining sleep time is displayed for about 3 seconds.

XL-35H

ENGLISH

Features
Advanced	1
	2

3 4

5 6

7

8

E-20

02/9/11 XL35H_H_E3.fm