Sharp XL-35H operation manual Listening to the memorised station, Memorising a station

XL-35H

ENGLISH

Listening to the memorised station

" Memorising a station " To recall a memorised station

Radio

E-15

You can store 30 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)

1Perform steps 1 - 3 in "Listening to the radio" on page 14.

2Press the MEMORY/SET (MEMORY)

button to enter the preset tuning sav- ing mode.

3Within 5 seconds, press the PRESET

( or ) button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4Within 5 seconds, press the MEMO-

RY/SET (MEMORY) button to store that station in memory.

If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a pre- set station.

When a new station is stored in memory, the station previously memorised will be erased.

Note:

The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead discon- nection.

Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station.

Preset channel Frequency and frequency band

"To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre- set memory scan)

1Press the PRESET ( or ) button for more than 0.5 sec- onds.

The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.

2Press the PRESET ( or ) button again when the desired station is located.

"To clear a memorised station

1 Recall the memorised station.

2 Whilst it is displayed, press the MEMO- RY/SET (MEMORY) button.

3 Within 5 seconds, press the CLEAR but- ton on the remote control.

02/9/11 XL35H_H_E2.fm