Recording to a cassette tape
ENGLISH
Tape Recording
E-17
Before recording:
!When recording important selections, make a preliminary test to ensure that the desired material is properly recorded.
!SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
!The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor).
!For recording, use only normal tapes. Do not use metal or CrO tapes.
"Recording from a CD
1Press the
2Press the FUNCTION button until "CD STOP" appears on the display.
When operating with the remote control, press the CD button.
3Load the desired disc.
4Load a cassette into the cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
5Press the button.
Recording will be paused.
6Press the () button.
!CD playback will start in a few seconds after the tape starts.
!When the playback of the disc is finished, the CD and the cassette will stop automatically.
To perform programmed recording:
1Programme tracks (see page 13).
2Press the button.
3Press the () button.
02/9/11 XL35H_H_E3.fm