Sharp XL-35H Listening to the radio, Radio, E-14, Manual tuning, Auto tuning, After use

Listening to the radio

XL-35H

ENGLISH

FM stereo mode indicator

FM stereo receiving indicator

1Press the ON/STAND-BY button to turn the power on.

2Press the FUNCTION button until "FM" or "AM" appears on the display.

When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM".

3Press the TUNING ( or ) button to tune in to the desired station.

Manual tuning:

Press the TUNING button as many times as required to tune in to the desired station.

Auto tuning:

When the TUNING button is pressed for more than 0.5 sec- onds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.

Notes:

!This can be operated by pressing the TUN. ( or ) button on the remote control.

!When radio interference occurs, auto scan tuning may stop automatically at that point.

!Auto scan tuning will skip weak signal stations.

!To stop the auto tuning, press the TUNING button again.

To receive an FM stereo transmission:

Press the FUNCTION (TUNER (BAND)) button to display the "ST" indicator.

!"" will appear when an FM broadcast is in stereo.

!If the FM reception is weak, press the FUNCTION (TUNER (BAND)) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Radio

1 2

3 4

5 6

7

8

E-14

02/9/11 XL35H_H_E2.fm