Sharp XL-35H operation manual Recording from the radio, Erasing a recorded tape

To interrupt recording:

Main unit operation:

Press the button.

To resume recording, press the button.

Remote control operation:

Press the button.

To resume recording, press the button.

To stop recording:

Press the button.

The tape will stop. When the button is pressed again, the CD will stop.

!Recording from the radio

1Tune in to the desired station (see page 14).

2Load a cassette into the cassette compartment with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

3Press the button.

Recording will be paused.

4Press the () button.

To stop recording:

Press the button.

Notes:

"If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.

"Whilst recording from the radio, the recording pause function does not work.

!Erasing a recorded tape

1.Load the tape to be erased into the cassette compartment with the side to be erased facing toward you.

2.Press the FUNCTION button until "TAPE" appears on the dis- play.

When operating with the remote control, press the TAPE button.

3.Press the button.

4.Press the () button to start erasing.

Erase-prevention tabs of cassette tapes:

"When recording on a cassette

	tape, make sure that the erase-		Side A
	prevention tabs are not re-
	moved. Cassettes have remov-
	able tabs that prevent
	accidental recording or erasing.
"	To protect the recorded sound,	Tab for side B	Tab for side A
	remove the tab after recording.
	Cover the tab hole with the ad-
	hesive tape to record on the
	tape without the tab.

XL-35H

ENGLISH

Recording
Tape	1
	2

3 4

5 6

7

8

E-18

02/9/11 XL35H_H_E3_2.fm