Sharp XL-MP15H operation manual Maintenance, Specifications

Maintenance

■Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.

Caution:

●Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.

●Do not apply oil to the inside of the unit. It may cause malfunctions.

■Cleaning the CD pickup lens

Do not touch the laser pickup lens. If finger prints or dust accumulate on the pickup, clean it gently with a dry cotton swab.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

■ General

Power source	AC 220 - 240 V ~ 50/60 Hz
Power consumption	Power on: 15 W
	Power stand-by: 0.6 W(*)
Dimensions	Width: 200 mm (7-7/8")
	Height: 137 mm (5-3/8")
	Depth: 210 mm (8-1/4")
Weight	1.5 kg (3.3 lbs.)

(*)This power consumption value is obtained when the main unit is in stand-by mode.

■Amplifier

Output power	MPO: 12 W (6 W + 6 W) (10% T.H.D.)
	RMS: 10 W (5 W + 5 W) (10% T.H.D.)
	RMS: 8 W (4 W + 4 W) (1% T.H.D.)
Output terminals	Speakers: 4 ohms
	Headphones: 16 - 50 ohms
	(recommended: 32 ohms)
Input terminals	Audio In (audio signal):
	250 mV/47 k ohms

■CD player

Type	1 disc top loading
Signal readout	Non-contact, 3-beam semiconductor
	laser pickup
D/A converter	Multi bit D/A converter
Frequency	20 - 20,000 Hz
response
Dynamic range	90 dB (1 kHz)

■	Tuner
Frequency range		FM: 87.5 - 108 MHz
		AM: 522 - 1620 KHz
Other		Maximum station can be stored is 40
		preset.
■	Speaker
Type		1-way type speaker system
		10 cm (4") Full Range
Maximum input		10 W
power
Rated input power		5 W
Impedance		4 ohms
Dimensions		Width: 135 mm (5-5/16")
		Height: 160 mm (6-14/64")
		Depth: 165 mm (6-1/2")
Weight		0.87 kg (1.92 lbs.)/each

16