Sharp XL-MP15H Setting the clock, Listening to a CD or MP3/WMA disc, To confirm the time display

Setting the clock

ON/ STAND-BY	MICRO COMPONENT SYSTEM
	XL-MP15
ON/ STAND-BY
	REMOTE
	SENSOR
PRESET
PHONES	AUDIO IN

PRESET

ON
STAND-BY	CLOCK
	TIMER

PRESET

Listening to a CD or MP3/WMA disc

This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.

MP3:

MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3.

MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality.

●This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files.

●During VBR file playback, time counter in the display may differ from its actual playback time.

●Bitrate which is supported by MP3 is 32 ~ 320 kbps.

WMA:

WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player.

●Bitrate which is supported by WMA is 64 ~ 160 kbps.

In this example, the clock is set for the 24-hour (00:00) display.

1In STAND-BY condition.

2Press the CLOCK/TIMER button for more than 2 seconds.

3Within 10 seconds, press the PRESET ( or ) button to set hour.

4Press the CLOCK/TIMER button again.

5Within 10 seconds, press the PRESET ( or ) button to set minute.

6Press the CLOCK/TIMER button again.

To confirm the time display:

Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.

To readjust the clock after a power failure or unplugging the unit or after unit is reset:

Perform “Setting the clock” from beginning.

Note:

To reset the clock if the power fails or is unplugged, the unit must be in the STAND-BY mode.

7