Sharp XL-UH2080H System connections continued, for Use, Preparation, „ AC power connection

XL-UH2080HSystem connections (continued)

for Use

„AC power connection

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.

Wall socket

(AC 220 - 240V ~ 50Hz)

Note:

Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

„External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

External FM aerial

75 ohms coaxial cable

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

Preparation

„Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button on the remote control. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/DEMO button on the remote control again.

Note:

When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.

10